KS 450

machine

band saws, pivoting movement, semi-automatic, steel and aluminum cut, miter

KS 450, suitable to cut structural steel, pipes, profiles and beams. Mitre cutting up to 60° left and right, easy stop at 0°,45° left and 45° right.

  • Very strong steel sawframe with tubular section, pulleys diameter 360 mm.
  • Hard metal pads inside the blade guides. Possibility to slide the frontal vice along the work table. Wide working space to support the material.
  • Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and detect automatically the start and end cut point.
  • Mobile console with 3-ways selector to choose different working modalities: the return of the sawframe with steady blade, or end at the cutting cycle without the return of the sawframe.
  • Cuuting capacity : round till 350 mm., square till 330 mm. and rectangular till 450x320 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

technical data

Area taglio angolare°-30 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.350 / 330 / 450x320
Blade dimensionsmm.4250 x 34 x 1.1
Blade Motor PowerKW1.7/2.2 or 2.2 ESC
Blade speedmt/min.35/70 or 15 ÷ 100 ESC
Dimensions ( B x L x H )mm.900x2500x2180
Altezza piano di lavoromm.850
WeightKg865
Type of functioningsemiautomatic
Suitable for cutting:Steel / cast iron / aluminium

features

Mobile Console

Mobile Console

Imet saws have as standard a mobile console for easy positioning of in accordance with the work to be performed.

Nylon clean blade brush KS

Nylon clean blade brush KS

As standard nylon blade cleaning brush powered by the movement of the drive pulley.

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Hydraulic power unit  KS

Hydraulic power unit KS

In KS bandsaws, the hydraulic power unit is located at the front of the column for a handy and easy access during periodic maintenance

Sensor Device KS

Sensor Device KS

All KS saws are fitted as standard with an approaching sensor device for automatic detection of the starting point of cutting.

optionals

Roller tables KS

Roller tables KS

Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

Roller tables RTL

Roller tables RTL

Roller tables with free rolls to be used on the unloading side, with manual movement, length stop and reading of the measure through LCD display, the length stop slides on balls recirculation guide, available in forms from 3 meters.

Roller tables RTP

Roller tables RTP

Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control.

Roller tables with motorized rolls RTR

Roller tables with motorized rolls RTR

Roller tables with motorized rolls, to be used for both loading– unloading side, driven by pinions, chain and electric motor controlled by an inverter; the management of the roller tables is performed trough a mobile push-button panel provided of: speed regulation movement, direction movement, emergency button,simultaneous or single functioning of the tables. Completable with metric rod, manual positioning with digital reading or motorized version. In the motorized version possibility to memorize up to 10 different lengths through PLC. Position sensor to slow down the run of the material and to guarantee the precision of the lengths of cut. Operation: once selected the sense of advancement of the loading-unloading tables, the operator through buttons moves the material that in proximity of the length stop will slow down automatically till the established measure.