VTF 500 SHI-E

machine

band saws, pivoting movement, semi-automatic, steel and aluminum cut, miter

Versatile semiautomatic vertical bandsaw,hydraulically driven, with electronic control panel. Mitre cutting from 0° to 45° left and right.

  • Front hydraulic vice with fast approach, integral with the sawframe rotation with easy stops at 0°, 45° left and 45° right.
  • Graduated plate to identify different angles. Horizontal motion of the sawframe on hardened and chromed guides.
  • Blade guides with hard metal pads, additional bearing for blade alignment.
  • Electronic Inverter for variable blade speed and motor with supplementary servo-ventilation.
  • Device to check the correct positioning of the blade.
  • Blade tension 2100 kg/cm², with micro-switch for blade tensioning checking.
  • Cutting Capacity: rounds till 330 mm., square till 330 mm. and rectangular till 300x500 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

technical data

Area angular cut°- 45 / 90 / +45
Cutting capacity at 90°: round / square / rectangularmm.330 / 330 / 300x500
Blade dimensionsmm.4130 x 34 x 1.1
Blade Motor PowerKW1.8
Blade speedmt/min.15÷110
Dimensions ( B x L x H )mm.1900x2000x2200
Height of the work-tablemm.930
WeightKg1010
Type of functioningSemiautomatic hydraulic
Suitable for cutting:Steel / cast iron

features

Tron interior photo

Tron interior photo

The PLC TRON controls all operational functions of the saw and provides information about the operating conditions of the machine (cutting time, blade speed, blade life, number of cuts made), complete with self-diagnostics for quick resolution of any problems encountered.

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Foot Pedal Control OPTIONAL

Foot Pedal Control OPTIONAL

Upon request for semi-automatic sawing machines a foot pedal control is available.

gallery

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

Roller Tables RTM

Roller Tables RTM

Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

Roller Tables RTD

Roller Tables RTD

Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

Roller tables RTP BS.

Roller tables RTP BS.

Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.