BS 400/60 AFI-NC INDUSTRY 4.0 READY

machine

band saws, pivoting movement, automatic, steel and aluminum cut, miter

CNC automatic bandsaw,hydraulically driven; mitre cutting from 0° to 60° left.

  • Hydraulic fixed vice with pressure reducer, anti-burr hydraulic vertical vice on the unloading side.
  • Adjustment of the blade tension from the front side of the sawframe, checked by an endstroke.
  • Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and detect automatically the start-cut point. Blade guides with hard metal pads, additional bearing for blade alignment.
  • Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
  • CNC driver with programming of all operations; machine status shown on display.
  • Feeder movements on chrome bars, high-precision of the positioning due to the incremental feeding on recirculating ball screw by self-braking electric motor with inverter.
  • Automatic calculation of the blade thickness. Feeder with 400 mm opening, maximum single stroke 515 mm.
  • Electronic Inverter for variable blade speed and motor with supplementary servo-ventilation.
  • Improvement of cutting performance due to blade size 34 mm.
  • Cutting Capacity: rounds till 310 mm., square till 280 mm. and rectangular till 400x250 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°90 +30
Cutting capacity at 90°: round / square / rectangularmm.310 / 280 / 400x250
Cutting capacity at 90°: rectangular with cutting bandlemm.max 300x120 min 120x20
Blade dimensionsmm.4020 x 34 x 1.1
Blade Motor PowerKW2.2
Run feeder carriage (repeatable)mm.515
Power motor feederKW0.75
Scrap end mm.80
Blade speedmt/min.18 ÷ 100
Motor hydraulic unitKW0.75
Tank Capacity of the hydraulic unitLt20
Capacity coolant tank Lt100
Dimensions ( B x L x H )mm.1850x2200x1990
Height of the work-tablemm.890
WeightKg990
Minimum cuttable length mm.4
Type of fucntioning semiautomatic/automatic CNC
Suitable for cutting:Steel /cast iron / high-strength steels

features

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Screw feeder

Screw feeder

In all our automatic NC Bandsaws the movement of the feeder is via a recirculating ballscrew and gear motor controlled by an inverter.

Hydraulic Device for Bundle Cutting BS 350  OPTIONAL

Hydraulic Device for Bundle Cutting BS 350 OPTIONAL

In case you need to cut multiple pieces simultaneously it is possible to request the hydraulic device for bundle cutting which is composed of two vertical cylinders mounted on the fixed vice and on the vice of the feeder

Blade Cleaning Brush BS 350

Blade Cleaning Brush BS 350

All saws model BS 350 have, as standard , the blade cleaning brush that is moved by the rotation of the drive pulley.

optionals

Roller tables KS

Roller tables KS

Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

Vertical Rollers  RTSKS

Vertical Rollers RTSKS

In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.