SIRIO 315 SH

machine

disc saws, pivoting movement, twin pillar, semi-automatic, steel and aluminum cut, miter

Heavy duty semiautomatic vertical saw; mitre cutting from 0° to 45° right and from 0° to 60° left.

  • Suited to cut high-resistance steel. Blade spindle with 40 mm diameter.
  • Semiautomatic version with electro-pneumatic functioning, hydraulic control of the down-feed speed of the head and pneumatic vice. Cutting cycles with adjustable feed speed during cut and
  • fast return.
  • Easy regulation of cut start/stop positions by 2 microswitch.
  • Vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping, anti-burr adjustable device.
  • Gears with oil, endless screw and bronze crown gear. Easy stops at 0° and 45° left, adjustable length stop.
  • Floor stand with removable chip collector and coolant tank; coolant electro-pump.
  • Cutting capacity at 90 °, round till 108 mm., square till 93 mm., rectangular till 150x90 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHUR

technical data

Area angular cut°-45 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.108 / 93 / 150x90
Blade dimensionsmm.315
Blade Motor PowerKW1.5 / 1.8
Blade speedRPM17/33 or 33/66
Capacity coolant tankLt40
Dimensions ( B x L x H )mm.800x900x1950
Height of the work-tablemm.925
WeightKg360
Type of functioningSemiautomatic pneumatic
Suitable for cutting:Steel / cast iron / high-strength steels

features

SIRIO quick vice lever

SIRIO quick vice lever

All circular saws mod. SIRIO have as standard transverse displacementof of the pneumatic front vice.

SIRIO blade cleaning brush

SIRIO blade cleaning brush

On all SIRIO models, nylon brushes are mounted to avoid damaging the cutting edge of the blade and to keep it always clean

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Foot Pedal Control OPTIONAL

Foot Pedal Control OPTIONAL

Upon request for semi-automatic sawing machines a foot pedal control is available.

gallery

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

Roller Tables RTM

Roller Tables RTM

Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

Roller Tables RTD

Roller Tables RTD

Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

Roller tables RTP BS.

Roller tables RTP BS.

Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.