SIRIO 370 AF-E

machine

disc saws, pivoting movement, twin pillar, automatic, steel and aluminum cut, miter

Automatic, vertical column circular saw; mitre cutting from 0° to 45° right (only semiautomatic cycle)and from 0° to 60° left.

  • Suited to cut high-resistance steel, the version with electronic Inverter widens the cutting possibilities, from stainless steel to brass and copper.
  • Primary transmission with pulleys and cogged belt, final reduction in oil bath with big-size bronze crown gear.
  • Vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping; anti-burr adjustable device, pneumatic vertical vice.
  • Blade spindle with 40 mm diameter.
  • Electronic driver with programming of all operations by means of the keyboard, including setting of the start-cut and end-cut points; machine status shown on display.
  • Feeder with 200 mm opening, maximum stroke 520 mm,minimum stroke 4 mm (minimum scrap-end 170 mm); selection of the number of cuts (1-9999) and the feeder strokes (1- 29) by means of the keyboard.
  • Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180x100 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°-45 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.120 / 100 / 180x100
Blade dimensionsmm.370
Blade Motor PowerKW1.5 / 2.2 or 3 ESC
Run feeder carriage (repeatable)mm.520
Scrap end mm.170
Blade speedRPM15/30 or 15 ÷ 70 ESC
Capacity coolant tankLt40
Dimensions ( B x L x H )mm.1900x1450x2100
Height of the work-tablemm.925
WeightKg710
Minimum cuttable length mm.4
Type of functioningsemiautomatic/automatic
Suitable for cutting:Steel / cast iron / high-strength steels

features

Tron interior photo

Tron interior photo

The PLC TRON controls all operational functions of the saw and provides information about the operating conditions of the machine (cutting time, blade speed, blade life, number of cuts made), complete with self-diagnostics for quick resolution of any problems encountered.

SIRIO quick vice lever

SIRIO quick vice lever

All circular saws mod. SIRIO have as standard transverse displacementof of the pneumatic front vice.

SIRIO Feeder

SIRIO Feeder

The feeder of the saw model SIRIO AF and AF-E-CN is mounted on a floating plate to adapt to the load of bars of material which is not perfectly straight. The movement is through an hydro pneumatic cylinder (AF-E) or through a toothed belt and motoreducer (AF-NC).

SIRIO blade cleaning brush

SIRIO blade cleaning brush

On all SIRIO models, nylon brushes are mounted to avoid damaging the cutting edge of the blade and to keep it always clean

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Electronic speed control ESC OPTIONAL

Electronic speed control ESC OPTIONAL

The version with electronic Inverter widens the cutting possibilities, from stainless steel to light alloys.

Sirio V-Jaws OPTIONAL

Sirio V-Jaws OPTIONAL

With the application of the cast iron V-Jaws it is possible to cut a bundle of tubes, diameter 85 mm max.; provided with assembling kit.

optionals

RASAFC

RASAFC

Connection element for loading table. Suitable for SIRIO 370 AF-E and AF-NC

Vertical rollers RTS

Vertical rollers RTS

To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length).

V- Rollers

V- Rollers

If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.