SIRIO 370 AF-NC INDUSTRY 4.0 READY

machine

disc saws, pivoting movement, twin pillar, automatic, steel and aluminum cut, miter

Automatic CNC vertical column circular saw; mitre cutting from 0° to 45° right (only semiautomatic cycle) and from 0° to 60° left.

  • Suited to cut high-resistance steel, the version with electronic Inverter widens the cutting possibilities, from stainless steel to brass and copper.
  • Primary transmission with pulleys and cogged belt, final reduction in oil bath with big-size bronze crown gear.
  • Vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping; anti-burr adjustable device, pneumatic vertical vice.
  • Blade spindle with 40 mm diameter.
  • Electro-pneumatic driven functioning,hydraulic control of the down-feed speed of the head.
  • Feeder movements by electric motor with encoder,200 mm. opening, minimum stroke 4 mm.(minimum scrap-end 170 mm.), maximum stroke 520 mm.
  • Up to 99 programs can be memorized, each one with different cutting lengths and number of cuts.
  • Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180x100 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°-45 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.120 / 100 / 180x100
Blade dimensionsmm.370
Blade Motor PowerKW3
Run feeder carriage (repeatable)mm.520
Scrap end mm.170
Blade speedRPM15 ÷ 70 ESC
Capacity coolant tankLt40
Dimensions ( B x L x H )mm.1900x1450x2100
Height of the work-tablemm.925
WeightKg740
Minimum cuttable length mm.4
Type of functioningsemiautomatic/automatic CNC
Suitable for cutting:Steel / cast iron / high-strength steels

features

SIRIO quick vice lever

SIRIO quick vice lever

All circular saws mod. SIRIO have as standard transverse displacementof of the pneumatic front vice.

SIRIO Feeder

SIRIO Feeder

The feeder of the saw model SIRIO AF and AF-E-CN is mounted on a floating plate to adapt to the load of bars of material which is not perfectly straight. The movement is through an hydro pneumatic cylinder (AF-E) or through a toothed belt and motoreducer (AF-NC).

SIRIO AF electrical board

SIRIO AF electrical board

The electrical board of the automatic vertical column circular saws SIRIO AF-E or AF-NC is placed in the rear of the machine in a comfortable position in case of technical intervention.

SIRIO blade cleaning brush

SIRIO blade cleaning brush

On all SIRIO models, nylon brushes are mounted to avoid damaging the cutting edge of the blade and to keep it always clean

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Display MAHLER

Display MAHLER

On our circular saws models SIRIO 370 AF-350 AF-VELOX NC and NC, the control system has some tactile buttons and a large LCD display easy to read. Can store up to 99 cutting lines with different lengths and quantities and store up to 99 cutting programs.

Sirio V-Jaws OPTIONAL

Sirio V-Jaws OPTIONAL

With the application of the cast iron V-Jaws it is possible to cut a bundle of tubes, diameter 85 mm max.; provided with assembling kit.

Bar Loader SLB 6 OPTIONAL

Bar Loader SLB 6 OPTIONAL

Bar loader for automatic CNC saws Sirio 370 AF-NC and VELOX 350 AF-NC. Suited to cut tubes with size from 20 to 90mm (round), 80x80 (square) or solids up to 50mm diameter, of 6 mt. lenght. Working cycle: (04.) when a bar is cut, a device driven by pneumatic cylinder, lifts the bar in the line and place it in on the loading table; then a motorized rubber-coated wheel forwards it to the saw. After reaching the cutting point, the vices of the saw clamp the material, (03.) the motorized wheel lifts and the cutting cycle begins. (02.) Loading plane is 6mt. long and 750mm. wide with adjustable inclination. The structure includes welded metal profiles, wholly protected by safety guard made of punched metalsheet and tubes. On request, special device to load smaller bars, from 20 mm till 10 mm diameter.

optionals

RASAFC

RASAFC

Connection element for loading table. Suitable for SIRIO 370 AF-E and AF-NC

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

V- Rollers

V- Rollers

If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.