VELOX 350 AF-E

machine

disc saws, pivoting movement, automatic, specific for aluminum, miter

Automatic circular saw suited to cut aluminium,light metal solids and profiles with high accuracy. Possibility to set the machine for brass and copper profiles.

  • Mitre cutting from 0° to 45° left and right.The head bends 45° on the vertical axis to allow inclined cuts.
  • Easy stops at 0°, 15°, 30°, 45° left and right. Hand-wheel to lock the head on all angles, graduation engraved on the worktable.
  • Electro-pneumatic functioning, hydraulic control of the down-feed speed of the head.
  • Electronic driver with programming of all operations by means of the keyboard.
  • Manual selection of the cutting length with digital reading and decimal nonius.
  • Pair of front pneumatic vices with quick clamping, free to move alongside the worktable, vertical pneumatic vice.
  • Feeder with 200 mm opening, maximum stroke 520 mm, minimum stroke 4 mm (minimum scrap-end 355 mm); selection of the number of cuts (1-9999) and the feeder strokes (1-29) by means of the keyboard.
  • Cast iron head avoids vibrations. Additional vertical pneumatic vice guarantee a perfect material locking.
  • Cutting capacity at 90 ° round till 120 mm., square till 105 mm. 200x80 mm.
  • TO SEE ALL THE CUTTING'CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

technical data

Area angular cut°-45 / 90 / +45
Cutting capacity at 90°: round / square / rectangularmm.120 / 105 / 200x80
Blade dimensionsmm.350
Blade Motor PowerKW2.2
Run of the feeder carriage (repeatable)mm.520
Scrap end mm.355
Blade speedRPM3600
Capacity coolant tank Lt40
Dimensions ( B x L x H )mm.1800x1300x1800
Height of the work-table mm.930
WeightKg590
Minimum cuttable length mm.4
Type of functioningsemiautomatic/automatic
Suitable for cutting:Aluminium and light alloys

features

Vertical Cut VELOX

Vertical Cut VELOX

The Velox circular Saws , in addition to the standard horizontal inclination from -45 ° to +45° have also the possibility to tilt the head vertically to 45 ° left.

Tron interior photo

Tron interior photo

The PLC TRON controls all operational functions of the saw and provides information about the operating conditions of the machine (cutting time, blade speed, blade life, number of cuts made), complete with self-diagnostics for quick resolution of any problems encountered.

Velox V-Jaws

Velox V-Jaws

With the application of the aluminum V-Jaws it is possible to cut a bundle of tubes, maximum diameter 85 mm.; provided with asssembling kit.

 Chips Aspirator Velox OPTIONAL

Chips Aspirator Velox OPTIONAL

Upon request a chips aspirator can be supplied to abate most of the chips produced during the cutting phase

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

V- Rollers

V- Rollers

If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.