VELOX 350 AF-NC INDUSTRY 4.0 READY

machine

disc saws, pivoting movement, automatic, specific for aluminum, miter

Automatic CNC circular saw suited to cut aluminium light metal solids and profiles with high accuracy. Possibility to set the machine for brass and copper profiles. Mitre cutting from 0° to 45° left and right.

  • The head bends 45° on the vertical axis to allow inclined cuts.
  • Easy stops at 0°, 15°, 30°, 45° left and right,hand-wheel to lock the head on all angles. Electro-pneumatic functioning, hydraulic control of the down-feed speed of the head.
  • Feeder with 200 mm opening, moving by electronic motor with inverter. Minimum stroke 4 mm (minimum scrap-end 355 mm). Up to 99 programs can be memorized, each one with different cutting lengths and number of cuts.
  • Programming of all operations by CNC control board easy to use complete of display that shows machine status and anomalies.
  • Cast iron head avoids vibrations. Additional vertical pneumatic vice guarantee a perfect material locking.
  • Cutting capacity at 90 ° round till 120 mm., square till 105 mm. 200x80 mm.
  • TO SEE ALL THE CUTTING'CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

technical data

Area angular cut°-45 / 90 / +45
Cutting capacity at 90°: round / square / rectangularmm.120 / 105 / 200x80
Blade dimensionsmm.350
Blade Motor PowerKW2.2
Run feeder carriage (repeatable)mm.520
Scrap end mm.355
Blade speedRPM3600
Capacity coolant tankLt40
Dimensions ( B x L x H )mm.1800x1450x1950
Height of the work-tablemm.930
WeightKg610
Minimum cuttable length mm.4
Type of fucntioningsemiautomatic/automatic CNC
Suitable for cutting:Aluminium and light alloys

features

Vertical Cut VELOX

Vertical Cut VELOX

The Velox circular Saws , in addition to the standard horizontal inclination from -45 ° to +45° have also the possibility to tilt the head vertically to 45 ° left.

Display MAHLER

Display MAHLER

On our circular saws models SIRIO 370 AF-350 AF-VELOX NC and NC, the control system has some tactile buttons and a large LCD display easy to read. Can store up to 99 cutting lines with different lengths and quantities and store up to 99 cutting programs.

Velox V-Jaws

Velox V-Jaws

With the application of the aluminum V-Jaws it is possible to cut a bundle of tubes, maximum diameter 85 mm.; provided with asssembling kit.

 Chips Aspirator Velox OPTIONAL

Chips Aspirator Velox OPTIONAL

Upon request a chips aspirator can be supplied to abate most of the chips produced during the cutting phase

Bar Loader SLB 6 OPTIONAL

Bar Loader SLB 6 OPTIONAL

Bar loader for automatic CNC saws Sirio 370 AF-NC and VELOX 350 AF-NC. Suited to cut tubes with size from 20 to 90mm (round), 80x80 (square) or solids up to 50mm diameter, of 6 mt. lenght. Working cycle: (04.) when a bar is cut, a device driven by pneumatic cylinder, lifts the bar in the line and place it in on the loading table; then a motorized rubber-coated wheel forwards it to the saw. After reaching the cutting point, the vices of the saw clamp the material, (03.) the motorized wheel lifts and the cutting cycle begins. (02.) Loading plane is 6mt. long and 750mm. wide with adjustable inclination. The structure includes welded metal profiles, wholly protected by safety guard made of punched metalsheet and tubes. On request, special device to load smaller bars, from 20 mm till 10 mm diameter.

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

V- Rollers

V- Rollers

If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.