H 700

machine

band saws, twin pillar, semi-automatic, steel and aluminum cut, straight cut

Semiautomatic twin column bandsaw for straight cut only, hydraulically driven. Conceived and projected especially for cutting profiles, pipes, beams and also solids.

  • The steel welded arch with new design and big thickness section guarantees the absolute lack of vibration and noise.
  • Saw frame movement on linear guide with recirculating balls.
  • Against the common use the sawframe canted allows saw blade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
  • Registrable band guides with hard metal pads and guided bearings. The mobile band guide is automatically kept nearest the cutting area. Electronic Inverter for variable blade speed. Driving console movable for a useful and secure positioning, equipped with power and speed regulation.
  • “Clean cut” due to the standard cooling system with minimal lubrication to cut long pipe and profile without any leakage of coolant.
  • Cutting capacity at 90 °: Round 520 mm., square 450 mm. Rectangular 680 x 400.
  • TO SEE ALL THE CUTTING'CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°90
Cutting capacity at 90°: round / square / rectangularmm.520 / 450 / 680x400
Cutting capacity at 90°: rectangular with cutting bundlemm.500x400
Blade dimensionsmm.5870 x 34 x 1.1
Inclination of the blade °5
Blade Motor PowerKW3
Blade speedmt/min.15÷100
Motor hydraulic unit KW0.75
Tank Capacity of the hydraulic unitLt20
Capacity coolant tank Lt3
Dimensions ( B x L x H )mm.1100x3300x2500
Height of the work-table mm.900
WeightKg1900
Type of functioning Semiautomatic hydraulic
Suitable for cutting:Steel / cast iron / high-strength steels / alloys

features

Mobile Blade Guide

Mobile Blade Guide

On our sawing machines the mobile blade guide is automatically kept in contact with the cutting point.

Mobile Console

Mobile Console

Imet saws have as standard a mobile console for easy positioning of in accordance with the work to be performed.

gallery

optionals

Roller tables KS

Roller tables KS

Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

Roller tables RTL

Roller tables RTL

Roller tables with free rolls to be used on the unloading side, with manual movement, length stop and reading of the measure through LCD display, the length stop slides on balls recirculation guide, available in forms from 3 meters.

Roller tables RTP

Roller tables RTP

Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control.

Vertical Rollers  RTSKS

Vertical Rollers RTSKS

In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.

Roller tables with motorized rolls RTR

Roller tables with motorized rolls RTR

Roller tables with motorized rolls, to be used for both loading– unloading side, driven by pinions, chain and electric motor controlled by an inverter; the management of the roller tables is performed trough a mobile push-button panel provided of: speed regulation movement, direction movement, emergency button,simultaneous or single functioning of the tables. Completable with metric rod, manual positioning with digital reading or motorized version. In the motorized version possibility to memorize up to 10 different lengths through PLC. Position sensor to slow down the run of the material and to guarantee the precision of the lengths of cut. Operation: once selected the sense of advancement of the loading-unloading tables, the operator through buttons moves the material that in proximity of the length stop will slow down automatically till the established measure.