KS 702 NC

machine

band saws, twin pillar, semi-automatic, steel and aluminum cut, miter

Semiautomatic twin column bandsaws with hydraulic lowering of the bow and motorized mitring by CNC control. Conceived and projected especially for cutting big profiles, beams, pipe and also solids. Possibility to make cuts with variable angle from 60° left to 60° right in automatic cycle.

  • The rotation of the machine is made with geared motor and linear encoder positioned at a high distance from the center of rotation for highest precision in the position with hydraulic locking of the rotation.
  • Automatic detection start/end cut points.
  • Against the common use the canted sawframe allows saw blade to freely and easily cut through the bottom of structural section without vibration,binding, or slowing down of sawing rates.
  • The steel welded arch with new design and big thickness section guarantees the absolute lack of vibration and noise.
  • The special section with inclined pulleys ensures a minor twist of the blade extending the life of the tool.
  • All movements of the sawing machine are on last generation recirculating ball screws guide.
  • “Clean cut” due to standard cooling system with minimal lubrication to cut long pipe and profile without any leakage of coolant.
  • It's available also with manual rotation of the
  • bow and digital display to show the angle, easy stops at 0° and 45° left and right.
  • Cutting capacity at 90 °: Round 520 mm., square 450 mm. Rectangular 680 x 400.
  • TO SEE ALL THE CUTTING'CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°-30 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.520 / 450 / 680x400
Blade dimensionsmm.5870 x 34 x 1.1
Inclination of the blade °6
Blade Motor PowerKW3
Blade speedmt/min.15 ÷ 100
Motor hydraulic unit KW1.5
Tank Capacity of the hydraulic unitLt50
Capacity coolant tank Lt3
Dimensions ( B x L x H )mm.1600x3300x2500
Height of the work-table mm.900
WeightKg1950
Type of functioning Semiautomatic hydraulic
Suitable for cutting:Steel / cast iron / high-strength steels / alloys

features

Mobile Blade Guide K

Mobile Blade Guide K

On the sawing machines the mobile blade guide is automatically kept in contact with the cutting point by means of a gas piston. The minimal lubrication is standard , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Mobile Blade Guide

Mobile Blade Guide

On our sawing machines the mobile blade guide is automatically kept in contact with the cutting point.

Safety Wire

Safety Wire

As standard the Ktech Saws have a safety system through a wire which in the event of detection of an obstacle or impediment will block the operation in automatic .

Motoreducer and Blocking

Motoreducer and Blocking

On all the saws, with automatic rotation of the saw frame, the rotation takes place via a toothed belt and gear motor , the blocking takes place via the hydraulic cylinder.

Display Angle  KS 702 OPTIONAL

Display Angle KS 702 OPTIONAL

With this accessory, which can be requested only for the model with manual rotation, the angle of the sawframe is visualized on an LCD display . It is easy to read, for customers who need to cut at angle.

gallery

optionals

Roller tables KS

Roller tables KS

Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

Roller tables RTL

Roller tables RTL

Roller tables with free rolls to be used on the unloading side, with manual movement, length stop and reading of the measure through LCD display, the length stop slides on balls recirculation guide, available in forms from 3 meters.

Roller tables RTP

Roller tables RTP

Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control.

Vertical Rollers  RTSKS

Vertical Rollers RTSKS

In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.