KS 1202 NC

machine

band saws, twin pillar, semi-automatic, steel and aluminum cut, miter

Semiautomatic twin column bandsaws with hydraulic lowering of the bow and motorized mitring by CNC control. Conceived and projected especially for cutting big profiles, beams, pipe and also solids. Possibility to make cuts with variable angle from 60° left to 60° right in automatic cycle.

  • The rotation of the machine is made with geared motor and linear encoder positioned at a high distance from the center of rotation for highest precision in the position with hydraulic locking of the rotation.
  • Automatic detection start/end cut points.
  • Against the common use the canted sawframe allows saw blade to freely and easily cut through the bottom of structural section without vibration,binding, or slowing down of sawing rates.
  • The steel welded arch with new design and big thickness section guarantees the absolute lack of vibration and noise.
  • The special section with inclined pulleys ensures a minor twist of the blade extending the life of the tool.
  • All movements of the sawing machine are on last generation recirculating ball screws guide.
  • “Clean cut” due to standard cooling system with minimal lubrication to cut long pipe and profile without any leakage of coolant.
  • It's available also with manual rotation of the
  • bow and digital display to show the angle, easy stops at 0° and 45° left and right.
  • Cutting capacity at 90 °: Round 680 mm., square 640 mm. Rectangular 1250 x 600.
  • TO SEE ALL THE CUTTING'CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut °-30 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.680 / 640 / 1250x600
Blade dimensionsmm.8140 x 54 x 1.6
Inclination of the blade °5
Blade Motor PowerKW5.5
Blade speedmt/min.15÷90
Motor hydraulic unit KW1.5
Tank Capacity of the hydraulic unitLt50
Capacity coolant tank Lt3
Dimensions ( B x L x H )mm.1950x4000x2750
Height of work-tablemm.855
WeightKg3600
Type of functioning Semiautomatic hydraulic
Suitable for cutting:Steel / cast iron / high-strength steels / alloys

features

Blade Tensioning KTECH

Blade Tensioning KTECH

Blade tensioning through electromechanical system controlled by the CNC of the machine.

Blocking of the rotation of the Saw Frame KTECH

Blocking of the rotation of the Saw Frame KTECH

On the KTECH and KS NC the rotation of the saw frame is motorized and controlled by CNC, the blocking of the rotation of the sawframe takes place through a hydraulic cylinder.

Mobile Blade Guide K

Mobile Blade Guide K

On the sawing machines the mobile blade guide is automatically kept in contact with the cutting point by means of a gas piston. The minimal lubrication is standard , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Safety Wire KS 802

Safety Wire KS 802

On our semiautomatic and automatic bandsaws Model 702 - 802-1202 as security in the rotation of the sawframe we have provided a safety wire which in case of contact with an obstacle will shut down the machine immediately.

gallery

optionals

Rulliere KTECH

Rulliere KTECH

Loading / Unloading Roller tables with free rollers, completable with measurement system. Please contact us for more technical features.