KTECH 502 F2000 INDUSTRY 4.0 READY

machine

band saws, twin pillar, automatic, steel and aluminum cut, miter

The K-Tech 502 F2000 , the natural development of the automatic version of the KS 502, has its movements guided by supports on heavy load balls type linear guideway, CNC control for clamps and arc rotation.

  • Control of cutting angles by encoder and inverter, optimized selection of cuts via cnc for multiple operations with simple guided programming.
  • It has an integrated keyboard with CNC control on 3 axes, large RAM memory, LCD display for guided setting of cut parts with the necessary angles, possibility of cutting with double angle on one side.
  • The numerical control allows to set and save over 300 cutting programs with different shapes,quantities and lengths.
  • Monoblock column and frame with conveyor in an electrically welded solid steel structure. High precision of positioning thanks to the linear hardened guides and to the recycling screw with a diameter of 32 mm, controlled by inverter.
  • Steel saw frame with tubular cross section; table for material supported by a central preloaded bearing. Adjustable bearings with conical rollers on a swinging pin. Single-block longlife gearmotor.
  • Blade tension 1700 Kg/cm2 with blade guide runners adjustable with hard metal inserts and guide bearings.
  • Adjustment of the force and speed of saw frame descent with separate controls, to adapt the cutting parameters to the type of material.
  • Total stroke 2050 mm, minimum scrap end 165 mm at 0°. Minimal lubrication system as standard.
  • End of the cut with tilted blade - minimum 5° on 450 mm ensure better penetration, increased blade life and rapid action.
  • Cuuting capacity : round till 310 mm., square till 280 mm. and rectangular till 450x270 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

technical data

Area angular cut °-30 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.350 / 335 / 500x325
Cutting capacity at 90°: rectangular with cutting bundlemm.max 500x250 min 160x40
Blade dimensionsmm.4250 x 34 x 1.1
Blade Motor PowerKW2.2
Run of feeder carriage (repeatable) mm.2050
Feeder motor powerKW0.75
Scrap end mm.165
Blade speedmt/min.18 ÷ 100
Motor hydraulic unit KW0.75
Tank Capacity of the hydraulic unitLt20
Capacity coolant tank Lt3
Dimensions ( B x L x H )mm.4120x2300x2180
Height of the work-table mm.845
WeightKg2200
Minimum cuttable length mm.30
Type of functioning semiautomatic/automatic CNC
Suitable for cutting:Steel / cast iron / high-strength steels

features

Sensor Device KS

Sensor Device KS

All KS saws are fitted as standard with an approaching sensor device for automatic detection of the starting point of cutting.

GRAFICS CNC KTECH 502

GRAFICS CNC KTECH 502

optionals

Roller tables KS

Roller tables KS

Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

Vertical Rollers  RTSKS

Vertical Rollers RTSKS

In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.