KTECH 702 F3000-6000 INDUSTRY 4.0 READY

machine

band saws, twin pillar, automatic, steel and aluminum cut, miter

Fully automatic twin column bandsaws with hydraulic lowering of the bow and automatic mitering with integrated NC control. Especially conceived for cutting medium and big size of profiles, beams, pipes and also solids. Possibility to cut with variable angle from 60° left to 60° right controlling with NC feeding and the mitering.

  • Steel sawframe with big thickness section guarantees the absolute lack of vibration and noise,worktable supported by a central pivot with preloaded bearings.
  • The rotation of the machine is made with self braking motor and linear encoder positioned at a high distance from the center of rotation for highest positioning precision.Hydraulic brake system of the rotation.
  • The CNC driver allows setting and memorizing more than 90 cutting programs, with different cutting lengths,quantities and angles.
  • From the console it can be regulated the speed of feeding and force of cutting.
  • Vertical hydraulic vice ensure a perfect locking of the material and avoid any vibrations Optional).
  • “Clean cut” due to standard cooling system with minimal lubrication to cut long pipe and profile without any leakage of coolant.
  • Hydraulic unit of new design with new low noise pump and locking valves on all the movements,with vice pressure reducers. Most processes are carried out with switched off hydraulic unit that allows a considerable saving of energy and maintains low the oil temperature.
  • Cutting capacity at 90 °: Round 520 mm., square 450 mm. Rectangular 680 x 400.
  • TO SEE ALL THE CUTTING'CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°-30 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.520 / 450 / 680x400
Cutting capacity at 90°: rectangular with cutting bundlemm.500x400
Blade dimensionsmm.5870 x 34 x 1.1
Inclination of the blade°6
Blade Motor PowerKW3
Run of the feeder carriage (repeatable) mm.3000-6000
Feeder motor powerKW1.5
Scrap end mm.300
Blade speedmt/min.15÷100
Motor hydraulic unit KW1.5
Tank Capacity of the hydraulic unitLt80
Capacity of the coolant tank Lt3
Dimensions ( B x L x H )mm.5400x3300x2500 ( F3000 )
Height of the work-table mm.900
WeightKg2900 ( F3000 )
Minimum cuttable length mm.30
Type of functioning semiautomatic/automatic CNC
Suitable for cutting:Steels / cast iron / high-strength steels / alloys

features

Blade Tensioning KTECH

Blade Tensioning KTECH

Blade tensioning through electromechanical system controlled by the CNC of the machine.

Blocking of the rotation of the Saw Frame KTECH

Blocking of the rotation of the Saw Frame KTECH

On the KTECH and KS NC the rotation of the saw frame is motorized and controlled by CNC, the blocking of the rotation of the sawframe takes place through a hydraulic cylinder.

Mobile Blade Guide K

Mobile Blade Guide K

On the sawing machines the mobile blade guide is automatically kept in contact with the cutting point by means of a gas piston. The minimal lubrication is standard , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Safety Wire

Safety Wire

As standard the Ktech Saws have a safety system through a wire which in the event of detection of an obstacle or impediment will block the operation in automatic .

gallery

optionals

Roller tables KS

Roller tables KS

Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

Vertical Rollers  RTSKS

Vertical Rollers RTSKS

In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.