XSMART 3 INDUSTRY 4.0 READY

machine

band saws, twin pillar, automatic, steel and aluminum cut, straight cut

Automatic hydraulic double column saw with robust mechanical structure associated with advanced technology, the new xsmart responds for automatic high production series

  • CNC control for programming multiple lengths and quantities on the same bar
  • Feeder carriage with bridge structure and roller conveyor for material support
  • Material feed by the electric motor and recirculating ballscrews
  • Double vice for clamping the workpiece before and after the blade
  • Pulleys Inclination of 30 degrees allows to extend the life of the blade
  • Double column saw frame with sliding on linear guides recirculating ballscrews
  • Sliding of the mobile blade guide on linear guides and recirculating ballscrews, with automatic approach of the workpiece
  • Sensor for automatic detection of the start cut point
  • Standard vice pressure adjustment
  • Standard cutting pressure adjustment
  • Mobile console
  • Led light for lighting the working area
  • Completely covered with easy access for maintenance
  • Electric conveyor chips as optional
  • Final scrap-end 50 mm
  • Washing Gun
  • Double Clamp Bridge feeder structure with roller tables support
  • Cleaning motorized brush

technical data

Area angular cut°90
Cutting capacity at 90°: round / square / rectangularmm.310 / 310 / 340x310
Cutting capacity at 90°: rectangular with cutting bandlemm.340x250
Blade dimensionsmm.3730 x 34 x 1.1
Inclination of the Blade °0
Blade Motor PowerKW3
Run of feeder carriage (repeatable) mm.500
Feeder motor powerKW0.75
Scrap end mm.50
Blade speedmt/min.15÷100
Motor Hydraulic UnitKW0.75
Capacity Tank of Hydraulic Unit Lt20
Capacity Coolant Tank Lt50
Dimensions ( B x L x H )mm.1950x1755x1965
Height of the Working-table mm.922
WeightKg1650
Minimum cuttable length mm.10
Type of Functioning semiautomatic/automatic CNC
Suitable for Cutting Steel / cast iron / high-strength steels / alloys

features

Pattini guidalama in metallo duro

Pattini guidalama in metallo duro

Spazzola pulilama motorizzata XSMART

Spazzola pulilama motorizzata XSMART

Carro avanzatore a portale SMART

Carro avanzatore a portale SMART

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

Vertical rollers RTS

Vertical rollers RTS

To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length).