GBS 242 GH

machine

band saws, pivoting movement, gravity feed, steel and aluminum cut, miter

Versatile bandsaw of GBS series to cut of small and medium batch production either mechanics or light steelwork up to 45° right and 60° left

  • Vice with adjustable guides, free to move alongaide the worktable with fast clamp.
  • Wide and pre-cutting worktable at 0°,45° left/right 60° left with graduated plate to identify different angles.
  • Blades guides with hard metal pad additional bearing for blade alignment.
  • Safe push-buttom start on the handle, warning light for the correct functioning, minimum tension coil, for
  • thermic & magnetic protection.
  • Floor stand with opening in the back containing removable coolant-tank and electro-pump.
  • AUTOCUT GH Version with "3 Ways " Selector:
  • - A Manual Cut.
  • - B Rapid approaching to material.
  • Automatic cut with autonomus lowering and stopping microswitch at the end of the cut.

technical data

Area angular cut°- 45 / 90 / +30
Cutting capacity at 90°: round / square / rectangularmm.250 / 210 / 290x210
Blade dimensionsmm.2965 x 27 x 0.9
Blade Motor PowerKW1.1/1.3
Blade speedmt/min.35/70
Dimensions ( B x L x H )mm.1500x1250x1700
Height of the work-tablemm.940
WeightKg290
Type of functioningManual/Gravity
Suitable for cutting:Steel / cast iron

features

Blade guides with hard metal pads

Blade guides with hard metal pads

Blade guides with hard metal pads with adjusting screws to compensate the wear and tear .

gallery

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

Roller Tables RTM

Roller Tables RTM

Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

Roller Tables RTD

Roller Tables RTD

Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

Roller tables RTP

Roller tables RTP

Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control.