CUBO 300

machine

band saws, pivoting movement, automatic, steel and aluminum cut, miter

CNC automatic bandsaw,hydraulically driven. Mitre cutting from 0° to 45° left in automatic cycle and from 0° to 60° left in semiautomatic cycle.

  • Easy stops at 0°, graduated plate to identify different angles.
  • High blade tensioning 1700 kg / cm² to increase cutting accuracy and reduce cutting time.
  • Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
  • CNC with programming of all operations; automatic calculation of the blade thickness.
  • Machine status shown on display, including blade speed, piece counter, and working anomalies. setting of the cutting lengths, minimal scrap-end 210 mm. Connection for loading table with 2 vertical rollers, unloading slide, connection for unloading table for cutting pieces.
  • Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection.
  • Cutting capacity : round till 255 mm., square till 240 mm. and rectangular till 300x180 mm.
  • TO SEE ALL THE CUTTING' CAPACITY, DOWNLOAD THE ATTACHED BROCHURE

technical data

Area angular cut°90 +30
Cutting capacity at 90°: round / square / rectangularmm.255 / 230 / 300x180
Cutting capacity at 90°: rectangular with cutting bundlemm.max 250x120 min 120x20
Blade dimensionsmm.2765 x 27 x 0.9
Motor Blade PowerKW1.5
Run of feeder carriage ( repeatable )mm.515
Feeder motor powerKW0.75
Scrap endmm.210
Blade speedmt/min.18 ÷ 110
Hydraulic unit motorKW0.75
Tank capacity tank of hydraulic unitLt20
Capacity coolant tankLt100
Dimensions ( B x L x H )mm.1800x1850x1880
Height of work-tablemm.870
Weightkg680
Minimum cuttable lengthmm.4
Type of functioningSemiautomatic/automatic CNC
Suitable for cutting:Steel / cast iron / high-strength steels

features

Minimal lubrication system OPTIONAL

Minimal lubrication system OPTIONAL

It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

Screw feeder

Screw feeder

In all our automatic NC Bandsaws the movement of the feeder is via a recirculating ballscrew and gear motor controlled by an inverter.

Position Sensor BS 300

Position Sensor BS 300

In all our semiautomatic and automatic saws the detection of the start point of cutting occurs automatically through the position sensor.

Microswitch end cut point BS 300

Microswitch end cut point BS 300

In all semiautomatic and automatic saws the adjustment of the end cut point is via a lever that activates a microswitch of easy positioning

Hydraulic Unit and electrical panel  BS 300 AFI

Hydraulic Unit and electrical panel BS 300 AFI

Practical positioning of the hydraulic unit for easy maintenance, electrical panel located under the control panel.

gallery

optionals

Roller tables RTS

Roller tables RTS

Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

Vertical rollers RTS

Vertical rollers RTS

To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length).