English
Español
Français
ItalianoGBS 185
Manual bandsaw for small carpentry
GBS 185 is the IMET manual bandsaw for small series production and for small carpentry cuts. GBS 185 can cut up to 60° to the left with a 200mm vice opening. The machine is equipped with a system of adjustable stops at 0 °, 45 ° and 60 ° to optimize positioning.
Other infos DownloadTechnical information
| Cutting capacity at 0 ° |
Round: 185mm Square: 180mm Rectangle: 200x155mm |
| Cutting capacity at 45° left |
Round: 110mm Square: 110mm Rectangle: 110x110mm |
| cutting capacity at 60° left |
Round: 70mm Square: 70mm Rectangle: 70x70mm |
| Cutting capacity at 0 ° for full (C45)) |
80mm |
| Blade dimensions |
2085x20x0,9mm |
| Blade motor |
0.8 KW |
| Blade speed |
30/60 m/min |
| Height of the work surface |
900mm |
| Weight |
215kg |
| Dimensions |
600x1200x1700mm h 900mm |
Download PDF
Work surface
GBS 185 GH has a large work surface with rotation integral with the sawframe designed to avoid incisions of the same on the ball bearing for easy rotation.
Vice
The vice with adjustable guides, sliding transversely on the work surface and rapid approach to the cutting material. di taglio.
Bandsaw blade
The bimetal blade has a size of 2965x27x0.9mm with a speed of use between 30 and 70 meters per minute making it the ideal tool for processing steel and cast iron.
Bar support (Optional)
Support element adjustable in height from 710 to 1100mm. Width 260mm, load 150kg
Connection for loading loading table (Optional)al)
Connection element for loading table .
Connection for unloading roller table (Optional)
Connection element for unloading table
Loading/Unloading table (Optional)
First element for roller table compatible for both the loading and unloading sides. Length 2m, capacity 700kg.
Loading /unloading table (Optional)
Following element for roller table compatible for both the loading and unloading sides.Length 2m, capacity 600kg.
Unloading roller table with metric rod and length stop (Optional)
Unloading roller table with metric rod and length stop, 1st element , 2mt long ,max capacity 700 kg
Unloading table with metric rod and length stop (Optional)
Unloading table with metric rod and length stop , following element ,2mt long , max capacity 600 kg
Pair of containment vertical rollers (Optional )
Pair of containment vertical rollers 300mm , made in steel , max 2 pairs for each element ,2 mt long : to be used without rollers cover ( only for RTS )
Work surface
GBS 185 GH has a large work surface with rotation integral with the sawframe designed to avoid incisions of the same on the ball bearing for easy rotation.
Vice
The vice with adjustable guides, sliding transversely on the work surface and rapid approach to the cutting material. di taglio.
Bandsaw blade
The bimetal blade has a size of 2965x27x0.9mm with a speed of use between 30 and 70 meters per minute making it the ideal tool for processing steel and cast iron.
Bar support (Optional)
Support element adjustable in height from 710 to 1100mm. Width 260mm, load 150kg
Connection for loading loading table (Optional)al)
Connection element for loading table .
Connection for unloading roller table (Optional)
Connection element for unloading table
Loading/Unloading table (Optional)
First element for roller table compatible for both the loading and unloading sides. Length 2m, capacity 700kg.
Loading /unloading table (Optional)
Following element for roller table compatible for both the loading and unloading sides.Length 2m, capacity 600kg.
Unloading roller table with metric rod and length stop (Optional)
Unloading roller table with metric rod and length stop, 1st element , 2mt long ,max capacity 700 kg
Unloading table with metric rod and length stop (Optional)
Unloading table with metric rod and length stop , following element ,2mt long , max capacity 600 kg
Pair of containment vertical rollers (Optional )
Pair of containment vertical rollers 300mm , made in steel , max 2 pairs for each element ,2 mt long : to be used without rollers cover ( only for RTS )
