GBS 218 GH is the IMET controlled descent sawing machine. Versatile and easy to use, GBS 218 GH is ideal for small and medium series mechanical productions and for small and medium carpentry. The machine makes angled cuts up to 60 ° to the left.
Other infos DownloadCutting capacity at 0 ° |
Round: 220mm Square: 210mm Rectangle: 230x185mm5mm |
Cutting capacity at 45 ° leftra |
Round: 150mm Square: 150mm Rectangle: 150x210mm0mm |
Cutting capacity at 60 ° leftra |
Round: 90mm Square: 90mm Rectangle: 90x100mm0mm |
Blade sizeama |
2455x27x0,9mm |
Blade motor |
1.2 KW |
Blade speed |
35/70 m/min |
Height of the work surface |
900mm |
Weight |
255kg |
Dimensions |
680x1400x1800mm |
GBS 218 GH has a large working area with rotation integral with the bow designed to avoid incisions on the same on a ball bearing for easy rotation.
The vice with adjustable guides, sliding transversely on the work surface and quick approach to the cutting material.
The blade guide of the GBS 218 GH are equipped with carbide inserts and additional front bearings for optimal blade alignment.
The bimetal blade has a size of 2455x27x0.9mm with a speed of use between 30 and 70 meters per minute making it the ideal tool for processing steel and cast iron.
The controlled descent system is equipped with automatic operation with a 3-position selector for:
Manual cutting
Quick approach to the material
Automatic cut with autonomous descent, adjustable stop and end cut microswitcht.
Support element adjustable in height from 710 to 1100mm. Width 260mm, load 150kg.
Connection element for loading table .
Connection element for unloading table
First element for roller table compatible for both the loading side and the unloading side. Length 2m, capacity 700 kg.
Following element for roller table compatible for both loading and unloading side. Length 2m,max capacity 600kg.
Containment element in steel. Maximum 2 pairs. Single 2m element. To be used without roller cover.
GBS 218 GH has a large working area with rotation integral with the bow designed to avoid incisions on the same on a ball bearing for easy rotation.
The vice with adjustable guides, sliding transversely on the work surface and quick approach to the cutting material.
The blade guide of the GBS 218 GH are equipped with carbide inserts and additional front bearings for optimal blade alignment.
The bimetal blade has a size of 2455x27x0.9mm with a speed of use between 30 and 70 meters per minute making it the ideal tool for processing steel and cast iron.
The controlled descent system is equipped with automatic operation with a 3-position selector for:
Manual cutting
Quick approach to the material
Automatic cut with autonomous descent, adjustable stop and end cut microswitcht.
Support element adjustable in height from 710 to 1100mm. Width 260mm, load 150kg.
Connection element for loading table .
Connection element for unloading table
First element for roller table compatible for both the loading side and the unloading side. Length 2m, capacity 700 kg.
Following element for roller table compatible for both loading and unloading side. Length 2m,max capacity 600kg.
Containment element in steel. Maximum 2 pairs. Single 2m element. To be used without roller cover.