English
Español
Français
ItalianoBS 300 PLUS
Manual bandsaw able to cut both left and right
BS 300 PLUS is the manual bandsaws that can cut both left (up to 60°) and right (up to 45°), a versatile working tool to realize small and medium batch production, a versatile working tool that can be used either in mechanics and steelwork.
video Other infos DownloadTechnical information
| Cutting capacity at 90° |
Round 255 mm. Square 230 mm. Rectangular 300x180mm |
| Cutting capacity at 45° right |
Round 210 mm. Square 190 mm. Rectangular 200x180mm |
| Cutting capacity at 45° left |
Round 180 mm. Square 160 mm. Rectangular 180x100mm |
| Cutting capacity at 60° left |
Round 135 mm. Square 110 mm. Rectangular 130x100mm |
| Maximum capacity for full materials |
Round 150 mm. Square 150 mm. Rectangular 150x150mm |
| Blade size. |
2765x27x0,9 |
| End-cutting bandsaw inclination |
3° |
| Blade motor |
1,5/1,8 kw |
| Blade speed |
35/70 15÷110 m/min |
| Hydraulic unit motor power |
kw 0,37 |
| Hydraulic united tank |
Lt 12 |
| Coolant tank |
Lt 20 |
| Size |
1230x1700x1750 mm |
| Working table height |
940 mm |
| Weight |
412kg |
Wide working area
BS 300 PLUS is equipped with a wide diameter working area and a system of automatic easy stops at 0°, 45° and 60° left and 45° right with graduated plate to identify and set different angles.
Opening vice
The vice has adjustable guides, free to move alongside the worktable, with rapid approaching and camping.
Rigid sawframe
Machine sawframe is rigid cast-iron with tubolar section, 320 mm pulleys, high blade tension at 1700 kg/cm2 and to avoid an excessive strain on the blade with frontal regulation and microswitch conroller.
Easy to use
Safe starting through the button on the handle with warning light to inform the use about the correct machine functioning. Coolant-tank and electropump are placed inside the floor stand.
Electromic inverter (Optional)
If required, the electronic inverter for variable blade speed allows the operator via keyboard to adjust the machine to be able to cut a wide range of materials and different sections. The change of speed is via inverter and it does not affect the power of the engine even at low speeds.
Minimal lubrification system (Optional)
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
Adapter to synchonize RTP/RTD (Optional)
Adapter to synchronize the RTP/RTD table with sawframe motion.
Laser ray (Optional
Bi-metal blade (Optional)
Size: 2765x27x0.9mm
Connection element for unloading table ((Optional)
Connection element for unloading table equipped with 1 roller ans a slide to collect coolant.
Loading/unloading table - first element (Optional)
Loading/unloading roller table, first element, 2 m long, maximum capacity 700kg.
Loading/unloading table - following element (Optional)
Loading/unloading roller table, 2m long, following element, maximum capacity 600kg.
Unloading roller table with metric rod - first element (Optional)
Unloading roller table with metric rod and length stop, 1st element, 2m long, maximum capacity 700kg.
Unloading roller table with metric rod - follwing element (Optional)
Unloading roller table with metric rod and length stop, following elemnt, 2m long, maximum capacity 600kg.
Unloading table: digital reading, manual posioning (Optional)
RTD2LW30
unloading table with digital reading and manual posioning, mesurement length 2m, capacity 700kg RTD4LW30
unloading table with digital reading and manual posioning, mesurement length 4m, capacity 1300kg RTD6LW30
unloading table with digital reading and manual posioning, mesurement length 6m, capacity 1900lg
Unloading table: motorized length stop, lenghts select. (Optional)
RTP3W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 3m, 1300kg. RTP6W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 6m, 1900kg. RTP9W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 9m, 2700kg
Pair of vertical roller 300mm (Optional)
Pair of vertical rollers 300 mm made in steel, max 2 pairs for each element 2m long. To use without rollers covers.
Wide working area
BS 300 PLUS is equipped with a wide diameter working area and a system of automatic easy stops at 0°, 45° and 60° left and 45° right with graduated plate to identify and set different angles.
Opening vice
The vice has adjustable guides, free to move alongside the worktable, with rapid approaching and camping.
Rigid sawframe
Machine sawframe is rigid cast-iron with tubolar section, 320 mm pulleys, high blade tension at 1700 kg/cm2 and to avoid an excessive strain on the blade with frontal regulation and microswitch conroller.
Easy to use
Safe starting through the button on the handle with warning light to inform the use about the correct machine functioning. Coolant-tank and electropump are placed inside the floor stand.
Electromic inverter (Optional)
If required, the electronic inverter for variable blade speed allows the operator via keyboard to adjust the machine to be able to cut a wide range of materials and different sections. The change of speed is via inverter and it does not affect the power of the engine even at low speeds.
Minimal lubrification system (Optional)
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
Adapter to synchonize RTP/RTD (Optional)
Adapter to synchronize the RTP/RTD table with sawframe motion.
Laser ray (Optional
Bi-metal blade (Optional)
Size: 2765x27x0.9mm
Connection element for unloading table ((Optional)
Connection element for unloading table equipped with 1 roller ans a slide to collect coolant.
Loading/unloading table - first element (Optional)
Loading/unloading roller table, first element, 2 m long, maximum capacity 700kg.
Loading/unloading table - following element (Optional)
Loading/unloading roller table, 2m long, following element, maximum capacity 600kg.
Unloading roller table with metric rod - first element (Optional)
Unloading roller table with metric rod and length stop, 1st element, 2m long, maximum capacity 700kg.
Unloading roller table with metric rod - follwing element (Optional)
Unloading roller table with metric rod and length stop, following elemnt, 2m long, maximum capacity 600kg.
Unloading table: digital reading, manual posioning (Optional)
RTD2LW30
unloading table with digital reading and manual posioning, mesurement length 2m, capacity 700kg RTD4LW30
unloading table with digital reading and manual posioning, mesurement length 4m, capacity 1300kg RTD6LW30
unloading table with digital reading and manual posioning, mesurement length 6m, capacity 1900lg
Unloading table: motorized length stop, lenghts select. (Optional)
RTP3W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 3m, 1300kg. RTP6W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 6m, 1900kg. RTP9W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 9m, 2700kg
Pair of vertical roller 300mm (Optional)
Pair of vertical rollers 300 mm made in steel, max 2 pairs for each element 2m long. To use without rollers covers.
