H 820

[ OUT OF PRODUCTION ]

[ OUT OF PRODUCTION ]

Semiautomatic bandsaws for big size tubes

H 820 is the semiautomatic double column bandsaw suitable for straight cuts with hydraulic bow movement. The machine is an affordable working tool for carpentry works able to cut pipes, tubes and solid materials. H 820 offers high cutting performances thanks to its 5° canted blade during the entire process.

Other infos Download

Technical information

Cutting capacity at 90° Round: 810mm
Square: 740mm
Rectangular: 810x740mm
Cutting capacity at 90° full materials 350mm
Blade motor 4KW
Blade speed 15
100 m/min
Blade size 7575x41x1.3mm
Blade tension 2000kg/cm2
Blade inclination
Weight 2300kg
Size 1150x3375x3100mm
Working table height 900mm
Hydraulic unit motor power 0.75KW
Hydraulic unit tank capacity 20l
Features
H820 BANDSAW

Sawframe with big structure

H 820 is equipped with an electrowelded bow, great thickness and tubolar section to help reduce vibration, binding and slowing during the cutting process. Sawframe movimentation is perfectly balanced because is on linear guides and guaranteed by the large diameter of the hydraulic cylinder.

H820 BANDSAW

Canted blade

H 820 blade has a 5° inclination to have a better performance while working: inclination allows to have a better peneatration during the process, reducing the blade strain and saving band-life to optimize the machine workflow.

H820 BANDSAW

Blade tensionin

The machine also have (like all the IMET bandsaws) a high blade tension (2000kg/cm2) to increase performances on every kind of cuttting process, even on bigger and wider section and full materials.

H820 BANDSAW

Blade cleaning

The machine mounts a motorized cleaning brush with nylon teeth, allowing to remove residuals and remainings in the cutting area and on the blade.

H820 BANDSAW

Blade guides

Registrable blade guides in metal pads and bearings. The mobile blade guide is automatically being kept next the cutting area.

H820 BANDSAW

Laser detecting system

H 820 uses a laser detecting system to detech the material before cutting and to relieve the first and end cut point during the sawframe descending and ascending.

H820 BANDSAW

Vice

H 820 has an hydraulic horizontal vice sliding on the working area to perfectly lock the cutting material.

H820 BANDSAW

Panel control

The mobile panel control gives the operator full control on the entire working process and it allows to set and modify all the main operative settings like blade speed and sawframe feeding speed, material penetration. The panel is also equipped with LCD control light.

Optionals
H820 BANDSAW

Minimal lubrification system (Optional)

It is possible to require, for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

H820 BANDSAW

Blade deviation control (Optional)

It's available the blade deviation control with stopping system in case of breakage to optimize cutting and working process.

H820 BANDSAW

Laser ray (Optional)

It's available a laser ray to optimize cutting process by pointing the cutting line

Roller tables
H820 BANDSAW

Free rolls roller table (Optional)

Loading and unloading roller table with free rolls, equipped with 3 vertical containment rolls. Single module length: 2m.