English
Español
Français
ItalianoH 1200
Semiautomatic double column bandsaw for 90° cuts
H 1200 is the semiautomatic double column bandsaw for straight cut (90°) that provides high working performances with reliable cutting quality and an optimized cutting process thanks to the 5° canted blade, easing the material penetration even on the biggest sizes. The machine is suitable for tubes, pipes, full materials and carpentry works
Other infos DownloadTechnical information
| Cutting capacity at 90° |
Round: 680mm Squareto: 640mm Rectangular: 1250x600mm |
| Cutting capacity at 90° full material |
500mm |
| Bundle cutting capacity |
1000x500mm MAX 110x20mm MIN |
| Blade motor |
7.5KW |
| Blade speed |
Da 15 a 90 m/min |
| Blade size |
8140x54x1.6mm |
| Blade tension |
3000kg/cm2 |
| Band inclination |
5° |
| Weight |
3400kg |
| Size |
1450x4000x2750mm |
| Working table height |
855mm |
| Hydraulic unit motor |
0.75KW |
| Hydraulic unit tank capacity |
20l |
Rigid sawframe
The machine has an electrowelded bow in steel with rigid tubolar section and large thickness: this structure helps avoid any vibration, binding or slowing of sawing rates while working. Sawframe movement is on linear guides, perfectly balanced with a big diameter hydraulic cylinder.
Panel control
Semiautomatic bandsaw of the H Line are equipped with 10" touch screen display mounted on a mobile consolle. The panel control gives to the operator full control on all the machine settings and operation while cutting.
Canted blade
H 1200 is equipped with a 5° canted blade to have the highest and best cutting perfomances on every type of material with any size, even on wider diameters.
Blade tension
Together with canted blade, the high blade tension (3000kg/cm2) allows the sawblade to freely and easily cut throught the bottom of large structures, improving cutting times and performances.
Smart cut approach
H 800 and H 1200 recognise the start cut point thanks to a magnetic strip with encoder for material reading: the operator must set the material size on the panel control, the machine starts the automatic fast lowering of the sawframe up to the set value. This process allows to have a faster and easier approach to the material, helping saving time.
Blade cleaning
The machine mounts a mechanical cleaning brush with nylon teeth so that the blade is always kept perfectly clean and the residuals can be removed while working.
Blade guides
Registrable blade guides in metal pads and bearings. The mobile blade guide is automatically being kept next the cutting area.
Vice
H 1200 mounts an hydraulic horizontal vice with full stroke so that the material is perfectly locked and ready to be cut.
Minimal lubrification system (Optional)
It is possible to require, for all Imet machines, the minimal lubrication system, it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way o affected. Minimal lubrification system has a 3 liters capacity.
Blade deviation control (Optional)
Blade deviation control with working stop in case of failure.
Bundle cutting (Optional)
Hydraulic device for bundle cutting (1000x500mm
110x20mm)
Loading and unloading roller table (Optional)
Loading and unloading roller table with free rolls. Single module 2m with 2 containment vertical rolls on one side.
Laser ray (Optional)
Laser ray to optimize the working process of the operator that helps to view the set cutting line.
Roller table preset for motorization (Optional)
Roller table preset for motorization with chain transmission and pignons. The element price is to be intended for a single metre.
Motorization system (Optional)
Motorization system for motorized roller table. Recommended every 6m in length. Max speed 10m/min
Motorized measurement length stop (Optional)
CNC motorized measurement length stop with fast approaching and automatic slowdown of the piece. To be ordered toghter with RTR motorized roller table. -RR6S measurement length 6m -RR9S measurement length 9m -RR12S measurement length 12m
Pair of vertical rollers (Optional)
Pair of containment vertical rollers made in steel. Max 2 pair every 1.5m element.
Rigid sawframe
The machine has an electrowelded bow in steel with rigid tubolar section and large thickness: this structure helps avoid any vibration, binding or slowing of sawing rates while working. Sawframe movement is on linear guides, perfectly balanced with a big diameter hydraulic cylinder.
Panel control
Semiautomatic bandsaw of the H Line are equipped with 10" touch screen display mounted on a mobile consolle. The panel control gives to the operator full control on all the machine settings and operation while cutting.
Canted blade
H 1200 is equipped with a 5° canted blade to have the highest and best cutting perfomances on every type of material with any size, even on wider diameters.
Blade tension
Together with canted blade, the high blade tension (3000kg/cm2) allows the sawblade to freely and easily cut throught the bottom of large structures, improving cutting times and performances.
Smart cut approach
H 800 and H 1200 recognise the start cut point thanks to a magnetic strip with encoder for material reading: the operator must set the material size on the panel control, the machine starts the automatic fast lowering of the sawframe up to the set value. This process allows to have a faster and easier approach to the material, helping saving time.
Blade cleaning
The machine mounts a mechanical cleaning brush with nylon teeth so that the blade is always kept perfectly clean and the residuals can be removed while working.
Blade guides
Registrable blade guides in metal pads and bearings. The mobile blade guide is automatically being kept next the cutting area.
Vice
H 1200 mounts an hydraulic horizontal vice with full stroke so that the material is perfectly locked and ready to be cut.
Minimal lubrification system (Optional)
It is possible to require, for all Imet machines, the minimal lubrication system, it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way o affected. Minimal lubrification system has a 3 liters capacity.
Blade deviation control (Optional)
Blade deviation control with working stop in case of failure.
Bundle cutting (Optional)
Hydraulic device for bundle cutting (1000x500mm
110x20mm)
Loading and unloading roller table (Optional)
Loading and unloading roller table with free rolls. Single module 2m with 2 containment vertical rolls on one side.
Laser ray (Optional)
Laser ray to optimize the working process of the operator that helps to view the set cutting line.
Roller table preset for motorization (Optional)
Roller table preset for motorization with chain transmission and pignons. The element price is to be intended for a single metre.
Motorization system (Optional)
Motorization system for motorized roller table. Recommended every 6m in length. Max speed 10m/min
Motorized measurement length stop (Optional)
CNC motorized measurement length stop with fast approaching and automatic slowdown of the piece. To be ordered toghter with RTR motorized roller table. -RR6S measurement length 6m -RR9S measurement length 9m -RR12S measurement length 12m
Pair of vertical rollers (Optional)
Pair of containment vertical rollers made in steel. Max 2 pair every 1.5m element.
