KS 652 is the semi-automatic double column sawing machine for cutting metal structural work, pipes, profiles and beams. The machine can cut right and left up to 60 ? and is equipped with a large support surface and visual reference on a graduated scale distant from the center of the machine for greater precision and ease of reading.
video Other infos DownloadCutting capacity at 0? |
Round: 510mm Square: 480mm Rectangular:650x450mm |
Cutting capacity at 45? left |
Round: 440mm Square: 430mm Rectangular:430x430mm |
Cutting capacity at 45? right |
Round: 440mm Square: 440mm Rectangular:440x440mm |
Cutting capacity at 60? left |
Round: 250mm Square: 250mm Rectangular:250x450mm |
Cutting capacity at 60? right |
Round: 250mm Square: 250mm Rectangular:250x450mm |
Cutting capacity (BUNDLE) |
Max: 650x450mm Min: 125x15mm |
Cutting capacity at 0? solids (C45) |
280mm (350mm with 4KW motoreducer and blade 41mm) |
Min. scrap-end with bundles |
250mm |
Blade motor |
3KW (option 4 KW) |
Blade speed |
Da 15 a 100 m/min |
Blade size |
5320x34x1.1mm (option blade 41 mm) |
Blade tensionning |
2000kg/cm2 |
Weight |
2100kg |
Dimensions |
1895x2870x2300mm |
The vice slides transversally on the work surface, linear guides, locking and rapid approach, complete with standard pressure reducer. All the saws of KS series (450, 502, 620 and 652) allow to fix the material clamping vice only once and then to rotate the arc for cutting both right and left (up to 60 ?).
Easy to use thanks to the rotating work surface integral with the arc and the blade passage to optimize the material support system during processing in all angles.
The cutting precision is ensured by the graduated scale (on the work surface) which constitutes a visual reference for the operator in case of angle cutting. There're also automatic stops at 45?left, 0 ? and 45 ? right. To increase cutting precision, IMET band saws are equipped of a system for detecting degrees of cut away from the center.
In electro-welded steel, the blade has an inclination of 6? to improve the penetration in the material and optimize the execution of the cut. The rotation of the arc is done by bearing preloaded. The KS 652 blade has has a tensionning of 2000kg / cm2 and is equipped with a control microswitch for immediate stop in case of blade breaking or power failure.
The blade of KS 652 has a tension of 2000 kg / cm2 and is equipped with a control microswitch for stopping immediately the blade in case of breaking or tension failure. The machine is equipped with blade guide sliding on linear guides for easy adjustment with hard metal inserts and additional bearings to improve alignment.
To facilitate the approach of the blade to the material KS450 mounts a device for detection automatic cutting start and end point.
KS 652 is equipped with a mobile control console with control LED for tensioning the blade, opening of the blade guard, motor thermal block and electrical tension. Through the coontrol the operator can choose between 3 different ways of cutting end: ascent of the bow with stopped blade, ascent of the bow with blade in movement and end of cycle without bow ascent.
Motorized nylon cleaning brush for blade, driven by motor pulley to always keep in perfect condition the cutting blade.
KS 652 offers the possibility to increase cutting performance through the 4KW gear motor, blade from 41mm high and hydraulic tension.