H 601 F500-1500 is the automatic double column bandsaw dedicated to cut carpentry profiles, tubes and solid materials. The machine can cut in automatic cycle up to 60° on the left and, thanks to its easy interface, 7" touch screen display, it's suitable to set up multiple cutting programs and length, while managing all main settings througth the CNC.
Other infos DownloadCutting capacity at 90° |
Round: 510mm Square: 450mm Rectangular: 610x440mm |
Cutting capacity at 45° |
Round: 440mm Square: 440mm Rectangular: 440x450mm |
Cutting capacity at 60° |
Round: 260mm Square: 260mm Rectangular: 250x450mm |
Cutting capacity at 90° with bundle |
Max 600x250mm Min 150x50mm |
Cutting capacity at 90° solid (C45) |
280mm (350mm with 41mm blade and 4KW motored.) |
Blade size |
5320x34x1.1mm |
Maximum opening of the vice |
620mm |
Blade inclination |
6° |
Blade motor |
3Kw (Option 4Kw) |
Blade speed |
15÷110 |
Minimum scrap-end |
100mm |
Feeder length |
550mm (option F1500) |
Minimum cutting length |
30mm |
Machine size (working table height) |
2650x2900x2170mm (820mm) |
Weight |
2300kg |
H 601 NC has an easy and intuitive interface dedidicate do optimize the user-experience: thanks the CNC system and 7" touch screen display, the user can manage all the machine operative function, set up 99 cutting program and multiple cutting length on the same bar, set the number of feeder stroke, the number of pieces and blade speed. It's also possibile to do an autodiagnostic to detech errors.
The machine has a wide working table supported by a central pivot with preloaded bearings. Its present a graded scale on the plate to ease the user workflow and the highest positioning precision. When the machine is cutting at 0°, the plate mounts a supplementary grid to fully support the material: to use the graded scale and the cut different angles, the grid must be removed.
Feeder length is 500mm (available also 1500mm) with automatic stroke repetition, movement on 32mm diameter bal recycle ballscrews. Feeder allows to have a 30 mm of minimum cutting length and 100mm minimum scrap-end.
H 601 NC has a high positioning precision and stroke repetition thanks to the incremental screw with self-bracking motor with inverter. The tollerance for every single feeder stroke is +/- 0.2mm on rectilinear bars.
H601 NC F500 allows to load in the feeder even not rectilinear bars thanks to its innovative system which open both sides jaws to ease this process. The sawing machine is also equipped with an integrated loading roll in the front which allows to load even big section and big size profiles.
H 601 NC is equipped with an electrowelded bow, great thickness and tubolar section to help reduce vibration, binding and slowing during the cutting process. Sawframe movimentation is perfectly balanced because is on linear guides and guaranteed by the large diameter of the hydraulic cylinder. Like all IMET bandsaws, also H 601 NC has a canted blade (5°) and high blade tension (2000kg/cm2) to reduce strain while cutting even on bigger section and full material.
The machine mounts an inverter ESC blade speed variator that allows to set and manage (via touch screen and interface) different speed so that it's possibile to cut multiple materials.
Mechanical material detect device allows to optimize the cutting process by easing the fast approach to thel materials, automatically detecting the first cut point and helping regulating the end cut.
H 601 NC uses a control microswitch on the metal blade guide to manage the end cut phase: the system automatically works during the sawframe rising after the cutting process ends.
Premium Line automatic bandsaws and semiautomatic and automatic Maxi Line bandsaws are standardly equipped with a washing gun dedicated to keep clean the working area and remove any residuals and remainings, allowing to keep the highest efficiency of the machine.
It's possibile to improve machine and cutting performances applying the 4KW supplementary motor reducer for, 41mm blade and hydraulic tensioning.
It's available as a optional the LCD dispaly to view the set cutting angletaglio selezionato tramite display.
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected
The laser ray allows to optimize the cutting process by indicating the cutting line that will be executed
Hydraulic bundle cutting device. (Max 600x250mm, min. 150x60mm).
IMET automatic machines can be connected to the company network and be used remotely thanks SAWFACTORY and modem. SAWFACTORY is a dedicated software which allows to manage the cutting process from the office desk by setting cutting programs and monitoring the workflow thanks to the dedicated web app. The software also allows to also receive assistance by our technicians remotely. Discover SAWFACTORY: https://bit.ly/2RuxHuX
Connection element between machine and rolling table for unloading side. When using the machine for straight cut, the element is made by two part (as in the attacched picture). If it's required to cut angles, one of the two supporting pieces byt me removed to reduce the supported area so that the sawframe could rotate.
Loading and unloading side roller table. Single element has a 1.5m length with a capacity of 1500kg and 1 leg.
Pair of vertical containment rollers made in steel. Max 2 pairs every 1.5m
Single vertical roller to prevent falls with 300mm height. Max 2 every 1.5m
H 601 NC has an easy and intuitive interface dedidicate do optimize the user-experience: thanks the CNC system and 7" touch screen display, the user can manage all the machine operative function, set up 99 cutting program and multiple cutting length on the same bar, set the number of feeder stroke, the number of pieces and blade speed. It's also possibile to do an autodiagnostic to detech errors.
The machine has a wide working table supported by a central pivot with preloaded bearings. Its present a graded scale on the plate to ease the user workflow and the highest positioning precision. When the machine is cutting at 0°, the plate mounts a supplementary grid to fully support the material: to use the graded scale and the cut different angles, the grid must be removed.
Feeder length is 500mm (available also 1500mm) with automatic stroke repetition, movement on 32mm diameter bal recycle ballscrews. Feeder allows to have a 30 mm of minimum cutting length and 100mm minimum scrap-end.
H 601 NC has a high positioning precision and stroke repetition thanks to the incremental screw with self-bracking motor with inverter. The tollerance for every single feeder stroke is +/- 0.2mm on rectilinear bars.
H601 NC F500 allows to load in the feeder even not rectilinear bars thanks to its innovative system which open both sides jaws to ease this process. The sawing machine is also equipped with an integrated loading roll in the front which allows to load even big section and big size profiles.
H 601 NC is equipped with an electrowelded bow, great thickness and tubolar section to help reduce vibration, binding and slowing during the cutting process. Sawframe movimentation is perfectly balanced because is on linear guides and guaranteed by the large diameter of the hydraulic cylinder. Like all IMET bandsaws, also H 601 NC has a canted blade (5°) and high blade tension (2000kg/cm2) to reduce strain while cutting even on bigger section and full material.
The machine mounts an inverter ESC blade speed variator that allows to set and manage (via touch screen and interface) different speed so that it's possibile to cut multiple materials.
Mechanical material detect device allows to optimize the cutting process by easing the fast approach to thel materials, automatically detecting the first cut point and helping regulating the end cut.
H 601 NC uses a control microswitch on the metal blade guide to manage the end cut phase: the system automatically works during the sawframe rising after the cutting process ends.
Premium Line automatic bandsaws and semiautomatic and automatic Maxi Line bandsaws are standardly equipped with a washing gun dedicated to keep clean the working area and remove any residuals and remainings, allowing to keep the highest efficiency of the machine.
It's possibile to improve machine and cutting performances applying the 4KW supplementary motor reducer for, 41mm blade and hydraulic tensioning.
It's available as a optional the LCD dispaly to view the set cutting angletaglio selezionato tramite display.
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected
The laser ray allows to optimize the cutting process by indicating the cutting line that will be executed
Hydraulic bundle cutting device. (Max 600x250mm, min. 150x60mm).
IMET automatic machines can be connected to the company network and be used remotely thanks SAWFACTORY and modem. SAWFACTORY is a dedicated software which allows to manage the cutting process from the office desk by setting cutting programs and monitoring the workflow thanks to the dedicated web app. The software also allows to also receive assistance by our technicians remotely. Discover SAWFACTORY: https://bit.ly/2RuxHuX
Connection element between machine and rolling table for unloading side. When using the machine for straight cut, the element is made by two part (as in the attacched picture). If it's required to cut angles, one of the two supporting pieces byt me removed to reduce the supported area so that the sawframe could rotate.
Loading and unloading side roller table. Single element has a 1.5m length with a capacity of 1500kg and 1 leg.
Pair of vertical containment rollers made in steel. Max 2 pairs every 1.5m
Single vertical roller to prevent falls with 300mm height. Max 2 every 1.5m