English
Español
Français
ItalianoKS 620
Semiautomatic bandsaw for steel constructions
The KS saws are the only ones in their class that can cut 60 ° right and left by positioning the locking vice only once. The vice is sliding transversely on the support surface with locking and rapid approach.
video Other infos DownloadTechnical information
| Cutting capacity at 0° |
Round: 500mm Square: 420mm Rectangular: 600x400mm |
| Cutting capacity at 45° left/right |
Round: 445mm Square: 410mm Rectangular: 450x250mm |
| Cutting capacity at 60° left |
Round: 320mm Square: 290mm Rectangular: 280x350mm |
| Cutting capacity at 60° right |
Round: 245mm Square: 240mm Rectangular: 240x310mm |
| Cutting capacity (BUNDLE) |
Max: 500x300mm Min: 160x40mm |
| Cutting capacity at 0° solids (C45) |
250mm |
| Blade size |
5320x34x1.1mm |
| Blade speed |
15-100m/min |
| Blade |
3KW |
| Working table height |
805mm |
| Blade inclination |
6° |
| Weight |
1450kg |
| Dimensions |
1705x2500x2500mm |
Vice and material locking
The vice slides transversally on the work surface, linear guides, locking and rapid approach, complete with standard pressure reducer. All the saws of KS series (450, 502, 620 and 652) allow to fix the material clamping vice only once and then to rotate the arc for cutting both right and left (up to 60 °).
Large working table
Easy to use thanks to the rotating work surface integral with the arc and the blade passage to optimize the material support system during processing in all angles.
Cutting precision
The cutting precision is ensured by the graduated scale (on the work surface) which constitutes a visual reference for the operator in case of angle cutting. There're also automatic stops at 45°left, 0 ° and 45 ° right. To increase cutting precision, IMET band saws are equipped of a system for detecting degrees of cut away from the center.
Steelframe and blade inclination
In electro-welded steel, the blade has an inclination of 6 ° to improve the penetration in the material and optimize the execution of the cut. The rotation of the arc is done by bearing preloaded. The blade of KS 620 has a tensionning of 2000kg / cm2 and is equipped with a control microswitch for immediate stop in case of blade breaking or power failure.
Inclinated blade
KS 620 and all the saws of the KS range finish the cut with the blade inclined 6 °, facilitating the penetration of the blade into the material and allowing to always cut a section of material even in presence of a solid.