English
Español
Français
ItalianoBS 350 SHI
Hydraulic semiautomatic bandsaw
The BS 350 SHI hydraulic semiautomatic bandsaw is suitable for cutting solid and medium-production profiles on a wide range of materials, including high-strength ones. The machine makes angled cuts up to 45 ° right and up to 60 ° left.
video Other infos DownloadTechnical information
| Cutting capacity at 0° |
Round: 305mm Square: 280mm Rectangular: 350x200mm |
| Cutting capacity at 45° left |
Round: 250mm Square: 230mm Rectangular: 230x200mm |
| Cutting capacity at 45° right |
Round: 255mm Square: 230mm Rectangular: 230x200mm |
| Cutting capacity at 60° left |
Round: 175mm Square: 155mm Rectangular: 170x100mm |
| Cutting capacity solid material (C45) |
Round 200mm |
| Cutting capacity bundle cutting |
Max: 230x160mm Min: 90x10mm |
| Blade motor |
1.5/2.2 KW |
| Blade motor with ESC speed variator |
2.2 KW |
| Blade speed |
37/74 m/min |
| Blade speed with ESC speed variator |
18/100 m/min |
| Blade size |
3370x27x0.9mm |
| Height of the work surface |
940mm |
| Weight |
649kg |
| Dimensions |
1480x1750x1900mm |
| Blade tension |
2000 kgf/cm2 |
Download PDF
Forgot your password? Click here ? Click here
Automatic material detection
BS 350 SHI is equipped with an automatic device for detecting the cutting material to optimize the cutting process: the device facilitates the approach to the material during the descent of the bow , also adjusts the end cut and the blade ascent.
Electric control panel
Machine operations are managed by means of an adjustable electric control panel, control LEDs and motor absorption ammeter.
Wide working surface
BS 350 SHI is equipped with a wide working surface 460 mm diameter with rotating table integral with the sawframe to avoid incisions of the table , rotation on thrust ring with pre-loaded thrust bearing.
Blade tension
The bimetal blade has a high tension, 2000kg / cm2, with front adjustment and microswitch control. The blade motor has a power between 1.5 / 2.2 Kw able to increase up to 2.2 KW with speed variator inverter.
Alignment of the blade
Bladeguides with hard metal pads and additional bearings to obtain the best blade alignment before and during cutting.
Hydraunlic vice
Hydraulic vice with adjustable guides free to move alongside the worktable , with quick motion and clamping.
Blade-cleaning brush
BS 350 SHI comes standard with a blade cleaning system by means of a motorized brush with nylon inserts; moved by the rotation of the driving pulley.
Minimal lubrication system
It is possible to request for any type of machine the minimum lubrication that eliminates the dispersion of typical coolant in the use of emulsifiable oil, the life of the blade does not come in any way affected.
Speed variator
Blade speed variator with inverter for a speed range of 18-100m / min.
LCD Display
It's available for these machine the LCD display dedicated to view the set cutting angle. The device is placed below the main panel control, attacched to the support.
Bundle cutting
Hydraulic device for bundle cutting. Max: 230x160mm
Min: 90x10mm. Not compatible with vertical hydraulic vice for unloading side.
Vertical hydraulic vice
For unloading side only. Not compatible with bundle cutting device.
Laser ray
Laser ray (not compatible with bundle device)