English
Español
Français
ItalianoVELOX 350 AF-NC
CNC automatic circular machine for aluminium
VELOX 350 AF-NC is the IMET automatic numerical control sawing machine, ideal tool for cutting alloys and aluminum, VELOX 350 AF-NC performs cuts from 45 ° left to 45 ° right and inclined up to 45 ° and is suitable for cutting of tubes and full sections.
video Other infos DownloadTechnical information
| Cutting capacity at 0° |
Round: 120mm Square: 105mm Rectangular:200x80mm |
| Cutting capacity at 45° left |
Round: 115mm Square: 100mm Rectangular: 150x80mm |
| Cutting capacity at 45° right |
Round: 115mm Square: 100mm Rectangular: 150x80mm |
| Cutting capacity at 45° inclinated |
Round: 65mm Square: 60mm Rectangular: 180x50mm |
| Cutting capacity at 0° for solids |
120mm |
| Blade speed |
3600rpm |
| Blade diam. |
350mm |
| Blade motor |
2.2KW |
| Feeder stroke |
520mm |
| Min. scrap end |
355mm |
| Min. lenght in automatic cycle |
15mm |
| Worktable height |
930mm |
| Coolant tank capacity |
40l |
| Weight |
607kg |
| Dimensions |
1800x1450x1950mm |
Head in cast iron
The cutting head of VELOX 350 AF-NC is in cast iron, monobloc to avoid vibrations. The vertical pneumatic vertical piston allows a better locking of the piece to be cut.
Vertical cutting
VELOX 350 AF-NC can perform cuts up to 45 ° from the vertical.
Touch screen display
Through the 7-inch touch screen display (with simple and intuitive graphics to optimize the user-experience it is possible to set and control all the machine parameters;the interface allows you to set up cutting projects with different quantities and lengths on the same bar and visualize any errors during the cutting process
Automatic stops
VELOX 350 AF-NC is equipped with automatic stops at 0 °, 15 °, 30 ° and 45 ° on the right and on the left, additional locking handwheel for any other angle.
Frontal vices
VELOX machines have two pneumatic front vices that slide transversely on the work surface.
Feeder
Feeder has a max. stroke of 520mm and it's placed on a floating plate to move better the not linear material. The stroke is done through hardened guides.
Longer feeder (Optional)
Longer feeder of 1200mm for VELOX AF-NC for automatic production.
V jaws (Optional)
Two pairs of cast iron V jaws to fittings bundles and round bars (max diameter 90 mm.) with tools to moun them
Bar loader reduction kit(Optional)
Bar loader reduction kit(FROM 20 TO 10MM) for barloader
Industry 4.0 - SAWFACTORY (Optional)
All IMET automatic sawing machines can be connected to the company network via modem and ethernet cable: SAWFACTORY software is also available for remote monitoring, assistance, programming and management from remote of the cutting process. The software allows to transfer data and programs from the PC (where it is created the programm) to the machine via USB. Discover SAWFACTORY: https://bit.ly/2RuxHuX
3kw blade motor and speed variator (Optional)
To optimize cutting performances with non-ferrous materials like brass, bronze and copper, the machine can be configurated with this optionals that includes: 3kw motoreducer and speed variator with inverter to have speed 1000-3600rpm and tank to collect coolant.
Blade (Optional)
VELOX 350 uses a HSS steel blade with hard metal teeth, diameter 350x3,2x32mm with 32mm hole.
Chips suction plant (Optional)
Chips suction plant complete of magnetothermic switch and flexible tube 1,5KW.
SLB6000 Barloader (Optional)
Barloader suitable for tubes (20mm-90mm), square (80x80mm), for solids (max 50mm).The structure in metal profiles, the front protection in tubular and perforated sheet guarantee maximum protection for the operator. Fully automatic, the management system allows you to to optimize your job. Length 6m.
SLB3000 Barloader (Optional)
Barloader suitable for tubes (20mm-90mm), square (80x80mm), for solids (max 50mm).The structure in metal profiles, the front protection in tubular and perforated sheet guarantee maximum protection for the operator. Fully automatic, the management system allows you to to optimize your job. Length 3m.
Bundle barloader (Optional)
The bundle loader allows you to load a bundle from 48mm to 90mm max. by chain transmission Managed by CNC numerical control, it is compatible with CNC automatic disc machines and allows to load up to 3 tons of bars with a length of 6m.
Connection for loading side (Optional)
Connection between machine and loading table, lenght 1m.
Loading/Unloading roller tables 1st unit (Optional)
1st unit of roller conveyor compatible for both the loading and unloading sides. Length 2m, loading capacity 140kg.
Titolo Loading/Unloading roller tables follow.unit (Optional)
Following unit of roller conveyor compatible for both the loading and unloading sides. Length:2m, loading capacity:120kg.
PVC V rollers (Optional)
Pairs of V rollers made in PVC for tubes, max 6 pairs per each element 2 m long, to be used on machines with V jaws, without rollers cover (only for RTS) (not available together with RI-W30) Pair of containment vertical rollers 300 mm made in steel, max 2 pairs for each element
PVC vertical rollers (Optional)
Pair of containment vertical rollers 300 mm made in PVC, max 2 pairs for each element 2 m long; to use without rollers cover (only for RTS) (not available together with RV-W30)
Head in cast iron
The cutting head of VELOX 350 AF-NC is in cast iron, monobloc to avoid vibrations. The vertical pneumatic vertical piston allows a better locking of the piece to be cut.
Vertical cutting
VELOX 350 AF-NC can perform cuts up to 45 ° from the vertical.
Touch screen display
Through the 7-inch touch screen display (with simple and intuitive graphics to optimize the user-experience it is possible to set and control all the machine parameters;the interface allows you to set up cutting projects with different quantities and lengths on the same bar and visualize any errors during the cutting process
Automatic stops
VELOX 350 AF-NC is equipped with automatic stops at 0 °, 15 °, 30 ° and 45 ° on the right and on the left, additional locking handwheel for any other angle.
Frontal vices
VELOX machines have two pneumatic front vices that slide transversely on the work surface.
Feeder
Feeder has a max. stroke of 520mm and it's placed on a floating plate to move better the not linear material. The stroke is done through hardened guides.
Longer feeder (Optional)
Longer feeder of 1200mm for VELOX AF-NC for automatic production.
V jaws (Optional)
Two pairs of cast iron V jaws to fittings bundles and round bars (max diameter 90 mm.) with tools to moun them
Bar loader reduction kit(Optional)
Bar loader reduction kit(FROM 20 TO 10MM) for barloader
Industry 4.0 - SAWFACTORY (Optional)
All IMET automatic sawing machines can be connected to the company network via modem and ethernet cable: SAWFACTORY software is also available for remote monitoring, assistance, programming and management from remote of the cutting process. The software allows to transfer data and programs from the PC (where it is created the programm) to the machine via USB. Discover SAWFACTORY: https://bit.ly/2RuxHuX
3kw blade motor and speed variator (Optional)
To optimize cutting performances with non-ferrous materials like brass, bronze and copper, the machine can be configurated with this optionals that includes: 3kw motoreducer and speed variator with inverter to have speed 1000-3600rpm and tank to collect coolant.
Blade (Optional)
VELOX 350 uses a HSS steel blade with hard metal teeth, diameter 350x3,2x32mm with 32mm hole.
Chips suction plant (Optional)
Chips suction plant complete of magnetothermic switch and flexible tube 1,5KW.
SLB6000 Barloader (Optional)
Barloader suitable for tubes (20mm-90mm), square (80x80mm), for solids (max 50mm).The structure in metal profiles, the front protection in tubular and perforated sheet guarantee maximum protection for the operator. Fully automatic, the management system allows you to to optimize your job. Length 6m.
SLB3000 Barloader (Optional)
Barloader suitable for tubes (20mm-90mm), square (80x80mm), for solids (max 50mm).The structure in metal profiles, the front protection in tubular and perforated sheet guarantee maximum protection for the operator. Fully automatic, the management system allows you to to optimize your job. Length 3m.
Bundle barloader (Optional)
The bundle loader allows you to load a bundle from 48mm to 90mm max. by chain transmission Managed by CNC numerical control, it is compatible with CNC automatic disc machines and allows to load up to 3 tons of bars with a length of 6m.
Connection for loading side (Optional)
Connection between machine and loading table, lenght 1m.
Loading/Unloading roller tables 1st unit (Optional)
1st unit of roller conveyor compatible for both the loading and unloading sides. Length 2m, loading capacity 140kg.
Titolo Loading/Unloading roller tables follow.unit (Optional)
Following unit of roller conveyor compatible for both the loading and unloading sides. Length:2m, loading capacity:120kg.
PVC V rollers (Optional)
Pairs of V rollers made in PVC for tubes, max 6 pairs per each element 2 m long, to be used on machines with V jaws, without rollers cover (only for RTS) (not available together with RI-W30) Pair of containment vertical rollers 300 mm made in steel, max 2 pairs for each element
PVC vertical rollers (Optional)
Pair of containment vertical rollers 300 mm made in PVC, max 2 pairs for each element 2 m long; to use without rollers cover (only for RTS) (not available together with RV-W30)
