fb

VELOX 350 AF-E

VELOX 350 AF-E

Automatic circular saw for aluminum

VELOX 350 AF-E is the electronic automatic disc sawing machine for cutting aluminum and light alloys. This machine is suitable for cutting tubes and full sections and has the possibility of cutting up to 45 ° left (in semi-automatic cycle), 45 ° right and up to 45 ° inclined to the vertical.

video Other infos Download

Technical information

Cutting capacity at 0° Round: 120mm
Square: 105mm
Rectangular:200x80mm
Cutting capacity at 45° left Round: 115mm
Square: 100mm
Rectangular:150x80mm
Cutting capacity at 45° right Round: 115mm
Square: 100mm
Rectangular:150x80mm
Cutting capacity at 45° inclinated Round: 65mm
Square: 60mm
Rectangular:180x50mm
Cutting capacity at 0° for solids 120mm
Blade speed 3600rpm
Blade diameter 350mm
Blade motor 2.2KW
Feeder stroke 500mm
Mim. scrap end 355mm
Min. lenght in automatic cycle 15mm
Worktable height 930mm
Coolant tank capacity 40l
Weight 565kg
Dimensions 1800x1300x1800mm

Download PDF

To download files enter username and password. .
Forgot your password? Click here ? Click here
Or CLICK HERE and register
VELOX 350 AF-E 1VEL.400V-3~

Head in cast iron

The cutting head of VELOX 350 AF-E is in cast iron, monobloc to avoid vibrations. The vertical pneumatic vertical piston allows a better locking of the piece to be cut.

VELOX 350 AF-E 1VEL.400V-3~

Vertical cutting

VELOX 350 AF-E can perform cuts up to 45 ° from the vertical.

VELOX 350 AF-E 1VEL.400V-3~

Control panel

All functions of the saw are manageable through PLC, extremely easy to use and complete with self-diagnosis for error detection. The machine is equipped with electronic control for setting the start cutting, the cut and cutting lengths of the bar.

VELOX 350 AF-E 1VEL.400V-3~

Manual positioning

VELOX 350 AF-E is equipped with a manual cutting length positioner with digital reading.

VELOX 350 AF-E 1VEL.400V-3~

Feeder

The feeder of VELOX 350 AF-E has 200mm opening, max. single stroke is 500mm, min. single stroke is 4mm, scrap-end is 355mm. Through the control panel, up to 99999 pieces and up to 29 feeder strokes can be selected.

VELOX 350 AF-E 1VEL.400V-3~

Automatic stops

VELOX 350 AF-E is equipped with automatic stops at 0 °, 15 °, 30 ° and 45 ° on the right and on the left, additional locking handwheel for any other angle.

VELOX 350 AF-E 1VEL.400V-3~

Frontal vices

The saws of the VELOX series have two sliding pneumatic front vices transversely on the work surface.

VELOX 350 AF-E 1VEL.400V-3~

V jaws

3 pairs of cast iron V jaws to fittings bundles and round bars (max diameter 90 mm.) with tools to mount them

VELOX 350 AF-E 1VEL.400V-3~

Scrap end reduction

To reduce the scrap to 220mm (minimum
maximum section 170x80mm), for VELOX 350 AF-E are available jaws for scrap end reduction.

VELOX 350 AF-E 1VEL.400V-3~

Blade

VELOX 350 uses a HSS steel blade with hard metal teeth, diameter 350x3,2x32mm with 32mm hole.

VELOX 350 AF-E 1VEL.400V-3~

Chips suction plant

Chips suction plant complete of magnetothermic switch and flexible tube 1,5KW.

VELOX 350 AF-E 1VEL.400V-3~

Connection for loading side

Connection between machine and loading table, lenght 1m.

VELOX 350 AF-E 1VEL.400V-3~

Loading/unloading table - 1st element

Loading/unloading table, 1st element, length 2 m, maximum capacity 140 kg

VELOX 350 AF-E 1VEL.400V-3~

Loading/unloading table - following element

Loading/unloading table, following element, length 2 m, maximum capacity 120 kg

VELOX 350 AF-E 1VEL.400V-3~

PVC V rollers

Pair of PVC V-rollers for bundles and round bars, to be used with machines not equipped with V-jaws and without roller cover table (max. 2 pairs per 2 m section) (not usable with RIAW30, to be used only with RTS)

VELOX 350 AF-E 1VEL.400V-3~

PVC vertical rollers

Pair of PVC vertical containment rollers, to be used without roller cover table (max. 2 pairs per 2 m section) (not usable with RVAW30, to be used only with RTS)