English
Español
Français
ItalianoVELOX 350 AF-E
Automatic circular saw for aluminum
VELOX 350 AF-E is the electronic automatic disc sawing machine for cutting aluminum and light alloys. This machine is suitable for cutting tubes and full sections and has the possibility of cutting up to 45 ° left (in semi-automatic cycle), 45 ° right and up to 45 ° inclined to the vertical.
video Other infos DownloadTechnical information
| Cutting capacity at 0° |
Round: 120mm Square: 105mm Rectangular:200x80mm |
| Cutting capacity at 45° left |
Round: 115mm Square: 100mm Rectangular:150x80mm |
| Cutting capacity at 45° right |
Round: 115mm Square: 100mm Rectangular:150x80mm |
| Cutting capacity at 45° inclinated |
Round: 65mm Square: 60mm Rectangular:180x50mm |
| Cutting capacity at 0° for solids |
120mm |
| Blade speed |
3600rpm |
| Blade diameter |
350mm |
| Blade motor |
2.2KW |
| Feeder stroke |
500mm |
| Mim. scrap end |
355mm |
| Min. lenght in automatic cycle |
15mm |
| Worktable height |
930mm |
| Coolant tank capacity |
40l |
| Weight |
565kg |
| Dimensions |
1800x1300x1800mm |
Head in cast iron
The cutting head of VELOX 350 AF-E is in cast iron, monobloc to avoid vibrations. The vertical pneumatic vertical piston allows a better locking of the piece to be cut.
Vertical cutting
VELOX 350 AF-E can perform cuts up to 45 ° from the vertical.
Control panel
All functions of the saw are manageable through PLC, extremely easy to use and complete with self-diagnosis for error detection. The machine is equipped with electronic control for setting the start cutting, the cut and cutting lengths of the bar.
Manual positioning
VELOX 350 AF-E is equipped with a manual cutting length positioner with digital reading.
Feeder
The feeder of VELOX 350 AF-E has 200mm opening, max. single stroke is 500mm, min. single stroke is 4mm, scrap-end is 355mm. Through the control panel, up to 99999 pieces and up to 29 feeder strokes can be selected.
Automatic stops
VELOX 350 AF-E is equipped with automatic stops at 0 °, 15 °, 30 ° and 45 ° on the right and on the left, additional locking handwheel for any other angle.
Frontal vices
The saws of the VELOX series have two sliding pneumatic front vices transversely on the work surface.
V jaws (Optional)
Two pairs of cast iron V jaws to fittings bundles and round bars (max diameter 90 mm.) with tools to mount them
Scrap end reduction (Optional)
To reduce the scrap to 220mm (minimum
maximum section 170x80mm), for VELOX 350 AF-E are available jaws for scrap end reduction.
Blade (Optional)
VELOX 350 uses a HSS steel blade with hard metal teeth, diameter 350x3,2x32mm with 32mm hole.
Chips suction plant (Optional)
Chips suction plant complete of magnetothermic switch and flexible tube 1,5KW.
Connection for loading side (Optional)
Connection between machine and loading table, lenght 1m.
Loading/Unloading roller tables 1st unit (Optional)
1st unit of roller conveyor compatible for both the loading and unloading sides. Length 2m, loading capacity 140kg.
Loading/Unloading roller tables follow.unit (Optional)
Following unit of roller conveyor compatible for both the loading and unloading sides. Length:2m, loading capacity:120kg.
PVC V rollers (Optional)
Pairs of V rollers made in PVC for tubes, max 6 pairs per each element 2 m long, to be used on machines with V jaws, without rollers cover (only for RTS) (not available together with RI-W30) Pair of containment vertical rollers 300 mm made in steel, max 2 pairs for each element
PVC vertical rollers (Optional)
Pair of containment vertical rollers 300 mm made in PVC, max 2 pairs for each element 2 m long; to use without rollers cover (only for RTS) (not available together with RV-W30)
Head in cast iron
The cutting head of VELOX 350 AF-E is in cast iron, monobloc to avoid vibrations. The vertical pneumatic vertical piston allows a better locking of the piece to be cut.
Vertical cutting
VELOX 350 AF-E can perform cuts up to 45 ° from the vertical.
Control panel
All functions of the saw are manageable through PLC, extremely easy to use and complete with self-diagnosis for error detection. The machine is equipped with electronic control for setting the start cutting, the cut and cutting lengths of the bar.
Manual positioning
VELOX 350 AF-E is equipped with a manual cutting length positioner with digital reading.
Feeder
The feeder of VELOX 350 AF-E has 200mm opening, max. single stroke is 500mm, min. single stroke is 4mm, scrap-end is 355mm. Through the control panel, up to 99999 pieces and up to 29 feeder strokes can be selected.
Automatic stops
VELOX 350 AF-E is equipped with automatic stops at 0 °, 15 °, 30 ° and 45 ° on the right and on the left, additional locking handwheel for any other angle.
Frontal vices
The saws of the VELOX series have two sliding pneumatic front vices transversely on the work surface.
V jaws (Optional)
Two pairs of cast iron V jaws to fittings bundles and round bars (max diameter 90 mm.) with tools to mount them
Scrap end reduction (Optional)
To reduce the scrap to 220mm (minimum
maximum section 170x80mm), for VELOX 350 AF-E are available jaws for scrap end reduction.
Blade (Optional)
VELOX 350 uses a HSS steel blade with hard metal teeth, diameter 350x3,2x32mm with 32mm hole.
Chips suction plant (Optional)
Chips suction plant complete of magnetothermic switch and flexible tube 1,5KW.
Connection for loading side (Optional)
Connection between machine and loading table, lenght 1m.
Loading/Unloading roller tables 1st unit (Optional)
1st unit of roller conveyor compatible for both the loading and unloading sides. Length 2m, loading capacity 140kg.
Loading/Unloading roller tables follow.unit (Optional)
Following unit of roller conveyor compatible for both the loading and unloading sides. Length:2m, loading capacity:120kg.
PVC V rollers (Optional)
Pairs of V rollers made in PVC for tubes, max 6 pairs per each element 2 m long, to be used on machines with V jaws, without rollers cover (only for RTS) (not available together with RI-W30) Pair of containment vertical rollers 300 mm made in steel, max 2 pairs for each element
PVC vertical rollers (Optional)
Pair of containment vertical rollers 300 mm made in PVC, max 2 pairs for each element 2 m long; to use without rollers cover (only for RTS) (not available together with RV-W30)
