CUBO 400 NC BOX is an automatic sawing machine belonging to the innovative CUBO SERIES. The sawing machine is a reliable ,safe and easy to use work tool due to the 7 " touch screen display with the possibility of managing the cutting process remotely via INDUSTRY 4.0 READY. Sawframe rotation is manual while the integrated feeder has a 500mm single stroke.
video Other infos DownloadCutting capacity at 0 ° |
Round: 310mm Square: 280mm Rectangle: 400x250mm0mm |
Cutting capacity at 45 ° left |
Round: 280mm Square: 270mm Rectangle: 300x200mm0mm |
Cutting capacity at 60 ° left |
Round: 210mm Square: 200mm Rectangle: 200x200mm0mm |
Capacity with beam cutting device |
Max: 300x160mm; Min. 85x10mm |
Cutting capacity at 0 ° for full (C45)) |
250mm |
Blade size lama |
4020x34x1.1mm |
Blade motor |
2.2KW |
Blade speedlla lama |
18-100m/min |
Minimum cuttable length in autom. cycle |
20mm |
Advance carriage stroke |
515mm |
Advance carriage motore |
0,75KW |
Minimal waste |
80mm |
Height of the work surfaceo |
890mm |
Weight |
990kg |
Dimensions |
1850x2200x1990mm |
CUBO is the line of automatic saws developed to optimize the user experience thanks to the introduction of various stylistic and functional innovations. Ease of use and operator safety during the cutting process make it the ideal work tool for any work environment.
Through the 7-inch touch screen display (with simple and intuitive graphics to optimize the user experience, it is possible to set and control all the machine parameters; the interface allows you to set cutting projects with different quantities and lengths on the same bar and to view any errors during the cutting processa .
It allows to store up to 99 cutting programs by automatically calculating the thickness of the blade, the total number of pieces to be cut, setting the cutting lengths and managing the automatic cutting cycle..
CUBO 400 NC BOX is equipped with a mechanical device for the automatic detection of the material and the cutting start point, optimizing the cutting process and the setting of the first cut. The management of the end of the cut is instead guaranteed by a microswitch.
CUBO 400 NC BOX has an integrated protection system on all sides of the machine to ensure maximum operator safety during cutting. The protection system does not prevent complete accessibility to all internal parts (movable and not) of the machine in case of maintenance.
Feeder movements on chrome bars high-precision of the positioning due to the incremental feeding on recirculating ball screw by self-braking electric motor with inverter .
All CUBO SERIES automatic sawing machines (in the BOX and FLAT versions) are equipped with an inverter speed variator as standard.
To keep the blade clean and prevent material chips from compromising the quality of the cut, the IMET semi-automatic and automatic saws are fitted as standard with a motorized blade cleaning brush with nylon teeth.
All CUBO Series automatic saws can be connected to the company network via modem: the dedicated software SAWFACTORY is also available for remote service, assistance, programming and remote management of the cutting process. The software allows to transfer data and programs from the PC (where the program is created) to the machine via USB. Discover SAWFACTORY: https://bit.ly/2RuxHuX
The CUBO automatic bandsaws can be used to cut a pack of tubes or bars with the bundle cutting device (able to be used only for straight cuts with single piece cuttin capacity of max 350x160mm and 55x10mm min. Bundle capacity: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the feedere vice and disconnecting the hydraulic tubes using the quick couplings system. Laser ray can't be used on the same machine with bundle device.
It is possible to request for any machine the minimal lubrication which eliminates the dispersion of coolant typical in the use of emulsifiable oil, the duration of the blade is not compromised in any way. Tank capacity: 1.3 liters.
It's available for all the CUBO SERIES automatic bandsaw an optional motorized chip conveyor placed laterally (on unloading side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing remainings and chips while cutting.
CUBO 400 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle. Link: https://youtu.be/wZAjSwt6x3Y
Two pressure reducers in kit for hydraulic vices are available for CUBO 350 NC BOX.
To optimize your workflow, a laser ray is available to locate and mark the cut line during the process. The option is not compatible with bundle device.
Connection element for roller table, loading side.
Following element for loading/unloading roller table with free rolls with 1 leg.
Pair of vertical steel containment rollers. Maximum 2 pairs for each 1,5m element; to be used without roller cover.
CUBO is the line of automatic saws developed to optimize the user experience thanks to the introduction of various stylistic and functional innovations. Ease of use and operator safety during the cutting process make it the ideal work tool for any work environment.
Through the 7-inch touch screen display (with simple and intuitive graphics to optimize the user experience, it is possible to set and control all the machine parameters; the interface allows you to set cutting projects with different quantities and lengths on the same bar and to view any errors during the cutting processa .
It allows to store up to 99 cutting programs by automatically calculating the thickness of the blade, the total number of pieces to be cut, setting the cutting lengths and managing the automatic cutting cycle..
CUBO 400 NC BOX is equipped with a mechanical device for the automatic detection of the material and the cutting start point, optimizing the cutting process and the setting of the first cut. The management of the end of the cut is instead guaranteed by a microswitch.
CUBO 400 NC BOX has an integrated protection system on all sides of the machine to ensure maximum operator safety during cutting. The protection system does not prevent complete accessibility to all internal parts (movable and not) of the machine in case of maintenance.
Feeder movements on chrome bars high-precision of the positioning due to the incremental feeding on recirculating ball screw by self-braking electric motor with inverter .
All CUBO SERIES automatic sawing machines (in the BOX and FLAT versions) are equipped with an inverter speed variator as standard.
To keep the blade clean and prevent material chips from compromising the quality of the cut, the IMET semi-automatic and automatic saws are fitted as standard with a motorized blade cleaning brush with nylon teeth.
All CUBO Series automatic saws can be connected to the company network via modem: the dedicated software SAWFACTORY is also available for remote service, assistance, programming and remote management of the cutting process. The software allows to transfer data and programs from the PC (where the program is created) to the machine via USB. Discover SAWFACTORY: https://bit.ly/2RuxHuX
The CUBO automatic bandsaws can be used to cut a pack of tubes or bars with the bundle cutting device (able to be used only for straight cuts with single piece cuttin capacity of max 350x160mm and 55x10mm min. Bundle capacity: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the feedere vice and disconnecting the hydraulic tubes using the quick couplings system. Laser ray can't be used on the same machine with bundle device.
It is possible to request for any machine the minimal lubrication which eliminates the dispersion of coolant typical in the use of emulsifiable oil, the duration of the blade is not compromised in any way. Tank capacity: 1.3 liters.
It's available for all the CUBO SERIES automatic bandsaw an optional motorized chip conveyor placed laterally (on unloading side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing remainings and chips while cutting.
CUBO 400 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle. Link: https://youtu.be/wZAjSwt6x3Y
Two pressure reducers in kit for hydraulic vices are available for CUBO 350 NC BOX.
To optimize your workflow, a laser ray is available to locate and mark the cut line during the process. The option is not compatible with bundle device.
Connection element for roller table, loading side.
Following element for loading/unloading roller table with free rolls with 1 leg.
Pair of vertical steel containment rollers. Maximum 2 pairs for each 1,5m element; to be used without roller cover.