VBS 600 S is the manual vertical bandsaw with fixed table (made in cast-iron) that can be inclinated up to 15° to ease material loading, support and user's workflow while cutting. It's a solid, resistant, easy to use professional working tool, suitable fo be used in every production plant and steel works factory to efficiently cut tubes and profiles.
Other infos DownloadCutting capacity (l x h) |
600 x 500 mm |
Loading table capacity |
600 x 760 mm |
Handwheels diameter |
625 mm |
Handwheels number |
2 |
Blade size |
5060 x 27 x 0.9 mm |
Blade motor power |
4 kw |
Blade speed |
120 1200 m/min |
Power supply |
400 volt trifase + T |
Machine size |
2745 x 1410 x 1200 mm |
Machine weight |
980 kg |
Working table height |
1080 mm |
VBS 400 S base is made in ectrowelded steel with rigid structure for the best stability (and reduce bindings a and vibrations) while cutting; it's equipped with two screws to lock it to the production floor. Fixed table is mounted on the upper side of the base.
The machine sawframe is made also in electrowelded steel and it supports two hand-wheels: the first positioned on the mobile tube with manual blade tensioning system (by an hand-wheel), the other is motorized with motoreducer managed by vectorial inverter.
The machine is manual with a panel control placed at the same height of the table. Thanks to the easy-to-use digital LCD display, the operator can set and regulate the blade rotation speed according to the material.
The supporting plate (or table) of VBS 600 S is made in cast-iron and positioned on the upper side of the machine base with the possibility to set up to 15° inclination.
The machine is equipped with two blade guides for blade alignment: the first positioned under the plate and the second mounted on the blade guide rod, adjustable on the base of the material thickness. The rod is put in action by a dedcated hand-wheel with mechanical brake to mantain the STOP in position.
It's available upon request a supplementary minimal lubrification system.
It's available a 400mm length stop to ease operator workflow.
VBS 400 S base is made in ectrowelded steel with rigid structure for the best stability (and reduce bindings a and vibrations) while cutting; it's equipped with two screws to lock it to the production floor. Fixed table is mounted on the upper side of the base.
The machine sawframe is made also in electrowelded steel and it supports two hand-wheels: the first positioned on the mobile tube with manual blade tensioning system (by an hand-wheel), the other is motorized with motoreducer managed by vectorial inverter.
The machine is manual with a panel control placed at the same height of the table. Thanks to the easy-to-use digital LCD display, the operator can set and regulate the blade rotation speed according to the material.
The supporting plate (or table) of VBS 600 S is made in cast-iron and positioned on the upper side of the machine base with the possibility to set up to 15° inclination.
The machine is equipped with two blade guides for blade alignment: the first positioned under the plate and the second mounted on the blade guide rod, adjustable on the base of the material thickness. The rod is put in action by a dedcated hand-wheel with mechanical brake to mantain the STOP in position.
It's available upon request a supplementary minimal lubrification system.
It's available a 400mm length stop to ease operator workflow.