KS 652

Double column semiautomatic bandsaw

KS 652 is the semi-automatic double column sawing machine for cutting metal structural work, pipes, profiles and beams. The machine can cut right and left up to 60 ° and is equipped with a large support surface and visual reference on a graduated scale distant from the center of the machine for greater precision and ease of reading.

video Other infos Download

Technical information

Cutting capacity at 0° Round: 510mm
Square: 480mm
Rectangular:650x450mm
Cutting capacity at 45° left Round: 440mm
Square: 430mm
Rectangular:430x430mm
Cutting capacity at 45° right Round: 440mm
Square: 440mm
Rectangular:440x440mm
Cutting capacity at 60° left Round: 250mm
Square: 250mm
Rectangular:250x450mm
Cutting capacity at 60° right Round: 250mm
Square: 250mm
Rectangular:250x450mm
Cutting capacity (BUNDLE) Max: 650x450mm
Min: 125x15mm
Cutting capacity at 0° solids (C45) 280mm (350mm with 4KW motoreducer and blade 41mm)
Min. scrap-end with bundles 250mm
Blade motor 3KW (option 4 KW)
Blade speed Da 15 a 100 m/min
Blade size 5230x34x1.1mm (option blade 41 mm)
Blade tensionning 2000kg/cm2
Weight 2100kg
Dimensions 1895x2870x2300mm

Download PDF

Technical sheet
Features
KS652 SHI N34 ESC 400V

Vice

The vice slides transversally on the work surface, linear guides, locking and rapid approach, complete with standard pressure reducer. All the saws of KS series (450, 502, 620 and 652) allow to fix the material clamping vice only once and then to rotate the arc for cutting both right and left (up to 60 °).

KS652 SHI N34 ESC 400V

Large working table

Easy to use thanks to the rotating work surface integral with the arc and the blade passage to optimize the material support system during processing in all angles.

KS652 SHI N34 ESC 400V

Cutting precision

The cutting precision is ensured by the graduated scale (on the work surface) which constitutes a visual reference for the operator in case of angle cutting. There're also automatic stops at 45°left, 0 ° and 45 ° right. To increase cutting precision, IMET band saws are equipped of a system for detecting degrees of cut away from the center.

KS652 SHI N34 ESC 400V

Rigid sawframe

In electro-welded steel, the blade has an inclination of 6° to improve the penetration in the material and optimize the execution of the cut. The rotation of the arc is done by bearing preloaded. The KS 652 blade has has a tensionning of 2000kg / cm2 and is equipped with a control microswitch for immediate stop in case of blade breaking or power failure.

KS652 SHI N34 ESC 400V

Blade tension

The blade of KS 652 has a tension of 2000 kg / cm2 and is equipped with a control microswitch for stopping immediately the blade in case of breaking or tension failure. The machine is equipped with blade guide sliding on linear guides for easy adjustment with hard metal inserts and additional bearings to improve alignment.

KS652 SHI N34 ESC 400V

Material detection device

To facilitate the approach of the blade to the material KS450 mounts a device for detection automatic cutting start and end point.

KS652 SHI N34 ESC 400V

Control panel

KS 652 is equipped with a mobile control console with control LED for tensioning the blade, opening of the blade guard, motor thermal block and electrical tension. Through the coontrol the operator can choose between 3 different ways of cutting end: ascent of the bow with stopped blade, ascent of the bow with blade in movement and end of cycle without bow ascent.

KS652 SHI N34 ESC 400V

Blade cleaning

Motorized nylon cleaning brush for blade, driven by motor pulley to always keep in perfect condition the cutting blade.

Optionals
KS652 SHI N34 ESC 400V

High performance package (Optional)

KS 652 offers the possibility to increase cutting performance through the 4KW gear motor, blade from 41mm high and hydraulic tension.

KS652 SHI N34 ESC 400V

Laser (Optional)


KS652 SHI N34 ESC 400V

Minimal lubrication system

The lubrication system cancels the dispersion of the coolant without damaging or affecting the life of the blade. The system is equipped with a 1.3l tank and nozzle.

KS652 SHI N34 ESC 400V

Angle display (Optional)


Roller tables
KS652 SHI N34 ESC 400V

Loading/unloading roller table (Optional)

Roller conveyor suitable for the unloading and loading side. Length 1.5m, 1 pedestal, max loading 1500kg.