English
Español
Français
ItalianoKS 450 FT
Compact semiautomatic bandsaw
KS 450 FT is the compact version of KS 450, IMET semi-automatic sawing machine for cutting pipes, beams, profiles and for steel constructions. The machine cuts at angle from 0 ° to 60 ° right and left.
video Other infos DownloadTechnical information
| Cutting capacity at 0° |
Round: 350mm Square: 330mm Rectangular: 450x320mm |
| Cutting capacity at 45° right/left |
Round: 330mm Square: 320mm Rectangular: 320x300mm |
| Cutting capacity at 60° left |
Round: 210mm Square: 200mm Rectangular: 180x270mm |
| Cutting capacity at 60° right |
Round: 160mm Square: 150mm Rectangular: 150x270mm |
| Cutting capacity at 90° (solids) |
Round: 250mm |
| Cutting capacity (BUNDLE) |
Max. 400x250mm Min. 160x40mm |
| Blade size |
4250x34x1.1mm |
| Blade speed |
40/80 m/min |
| Variable speed inverter (ESC) |
15/100 m/min |
| Blade motor |
1.7/2.2 KW |
| Blade motor with inverter (ESC) |
2.2 KW |
| Working table height |
850mm |
| Dimensions |
900x2500x2180mm |
| Weight |
865kg |
Steel sawframe
Ks 450FT is equipped with rigid welded steel tubular section arc and 360mm pulleys. Rotation of the arc is done on prealoaded bearing to ensure arc rotation without friction and easier. The optimal alignment of the blade is guaranteed by the blade guide with inserts in carbide and additional bearings.
Vice
Sliding transversely on the work surface with locking and hydraulic approach, complete with reducer of pressure. Total stroke: 460mm.
Working table
The work surface of the KS 450 FT is wide to be able to support all the material; the table is equipped with a system automatic stops at 45 ° left, 0 ° and 45 ° right. All other inclinations are viewable hrough the graduated scale on the cutting table.
Material detection device
To facilitate the approach of the blade to the material KS450FT mounts a device for detection automatic cutting start and end point.
Control panel
KS 450 FT s equipped with a control console attached to the column with a control LED for checking blade tensionning, blade guard, motor thermal block and electric voltage.
Cut end
It is possible to choose the cutting end mode:
ascent of arch with stopped blade;
arch ascent with moving blade;
end of cycle without ascent of the arch;
Blade cleaning
Motorized nylon cleaning brush for blade, driven by motor pulley to always keep in perfect condition the cutting blade.
Minimal lubrication system (Optional)
The lubrication system cancels the dispersion of the coolant without damaging or affecting the life of the blade. The system is equipped with a 1.3l tank and nozzle.
Bundle cutting device (Optional)
It's available on this model the hydraulique device for bundle cutting. Adding the vice to the machine cutting capacities are: max 400x250mm, min 160x40mm.
Loading/unloading roller table (Optional)
Roller conveyor suitable for the unloading and loading side. Length 1.5m, 1 pedestal, max loading 1500kg. To attach the roller table you need to order the connection.
Unloading roller table (Optional)
Unloading roller table with digital reading and manual movement. Available : -RTL3KS450 Measuring lenght of 3m, 3 pedestals, max loading 3000kg; -RTL6KS450 Measuring lenght of 6m, 5 piedestals, max loading 6000kg.
Unloading roller table (Optional)
Unloading roller table with length stop and selection of the lengths by means of a keyboard Available: -RTP3KS450 Measuring lenght of 3m, 3 pedestals, max loading 3000kg; -RTP6KS450 Measuring lenght of 6m, 5 piedestals, max loading 6000kg.
Motorized loading roller table (Optional)
Loading motorised roller tables, with chain transmission and motor reducer managed by inverter, with mobile keyboard. Available : -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.
Motorized unloading roller table (Optional)
Unloading motorized roller table, with chain transmission and motor reducer managed by inverter, available only together with loading roller table. Available: -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.
Additional foot in kit for machine
Additional foot in kit, to be used to fix the machine to ground once positioned
Additional foot in kit for roller tables
Additional foot in kit, to be used to fix the roller tables to ground once positioned
Digital reading length stop (Optional)
igital reading length stop with manual positioning with automatic slowdown sensors, available only together ith unloading motorized roller table Measuring lenght 3m; Measuring lenght 6m; Measuring lenght 9m; Measuring lenght 12m
Motorized lenght stop (Optional)
Numerical control motorized measurement RR with fast approching for automatic slowdown of the piece (to be ordered coupled with automatic conveyors) -RR6S 6m measuring lenght -RR9S 9m measuring lenght -RR12S 12m measuring lenght
Vertical single roller (Optional)
Single vertical roller, height of 250 mm. to prevent falls, max 2 each 1,5 mt.
Vertical rollers (Optional)
Pair of containment vertical rollers, made in steel, max 2 pairs for each element 1,5 mt long.
Steel sawframe
Ks 450FT is equipped with rigid welded steel tubular section arc and 360mm pulleys. Rotation of the arc is done on prealoaded bearing to ensure arc rotation without friction and easier. The optimal alignment of the blade is guaranteed by the blade guide with inserts in carbide and additional bearings.
Vice
Sliding transversely on the work surface with locking and hydraulic approach, complete with reducer of pressure. Total stroke: 460mm.
Working table
The work surface of the KS 450 FT is wide to be able to support all the material; the table is equipped with a system automatic stops at 45 ° left, 0 ° and 45 ° right. All other inclinations are viewable hrough the graduated scale on the cutting table.
Material detection device
To facilitate the approach of the blade to the material KS450FT mounts a device for detection automatic cutting start and end point.
Control panel
KS 450 FT s equipped with a control console attached to the column with a control LED for checking blade tensionning, blade guard, motor thermal block and electric voltage.
Cut end
It is possible to choose the cutting end mode:
ascent of arch with stopped blade;
arch ascent with moving blade;
end of cycle without ascent of the arch;
Blade cleaning
Motorized nylon cleaning brush for blade, driven by motor pulley to always keep in perfect condition the cutting blade.
Minimal lubrication system (Optional)
The lubrication system cancels the dispersion of the coolant without damaging or affecting the life of the blade. The system is equipped with a 1.3l tank and nozzle.
Bundle cutting device (Optional)
It's available on this model the hydraulique device for bundle cutting. Adding the vice to the machine cutting capacities are: max 400x250mm, min 160x40mm.
Loading/unloading roller table (Optional)
Roller conveyor suitable for the unloading and loading side. Length 1.5m, 1 pedestal, max loading 1500kg. To attach the roller table you need to order the connection.
Unloading roller table (Optional)
Unloading roller table with digital reading and manual movement. Available : -RTL3KS450 Measuring lenght of 3m, 3 pedestals, max loading 3000kg; -RTL6KS450 Measuring lenght of 6m, 5 piedestals, max loading 6000kg.
Unloading roller table (Optional)
Unloading roller table with length stop and selection of the lengths by means of a keyboard Available: -RTP3KS450 Measuring lenght of 3m, 3 pedestals, max loading 3000kg; -RTP6KS450 Measuring lenght of 6m, 5 piedestals, max loading 6000kg.
Motorized loading roller table (Optional)
Loading motorised roller tables, with chain transmission and motor reducer managed by inverter, with mobile keyboard. Available : -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.
Motorized unloading roller table (Optional)
Unloading motorized roller table, with chain transmission and motor reducer managed by inverter, available only together with loading roller table. Available: -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.
Additional foot in kit for machine
Additional foot in kit, to be used to fix the machine to ground once positioned
Additional foot in kit for roller tables
Additional foot in kit, to be used to fix the roller tables to ground once positioned
Digital reading length stop (Optional)
igital reading length stop with manual positioning with automatic slowdown sensors, available only together ith unloading motorized roller table Measuring lenght 3m; Measuring lenght 6m; Measuring lenght 9m; Measuring lenght 12m
Motorized lenght stop (Optional)
Numerical control motorized measurement RR with fast approching for automatic slowdown of the piece (to be ordered coupled with automatic conveyors) -RR6S 6m measuring lenght -RR9S 9m measuring lenght -RR12S 12m measuring lenght
Vertical single roller (Optional)
Single vertical roller, height of 250 mm. to prevent falls, max 2 each 1,5 mt.
Vertical rollers (Optional)
Pair of containment vertical rollers, made in steel, max 2 pairs for each element 1,5 mt long.
Products RELATED
