English
Español
Français
ItalianoXS 900
Semiautomatic bandsaws for industrial application
XS 900 is the big size, industrial application semiautomatic bandsaw suitable to cut big dimension profiles and solids of special steels with vertical descent and straight cut. The machine is the perfect industrial tool, able to support big format pieces thanks to wide working area and 7 motorized integrated rollers.
video Other infos DownloadTechnical information
| Cutting capacity at 0° |
Round: 900mm Square: 900mm Rectangular: 900x900mm |
| Blade motor |
11KW |
| Blade speed |
Da 14 a 60 m/min |
| Blade size |
9300x67mm |
| Blade tension |
3000kg/cm2 |
| Canted blade |
0° |
| Hydraulic unit motor power |
3KW |
| Hydraulic unit tank capacity |
80l |
| Coolant tank capacity |
220l |
| Weight |
8450kg |
| Size |
4485x1680x3150mm |
| Working table height |
790mm |
Steel sawframe
The machine has a big size, strong, rigid and imposing electrowelded sawframe structure, sliding on linear guides which movement is provided by recystculating ballscrws. Big size structure increase machine stability, efficiency and performances while cutting even the biggest pieces.
Rigid structure
To further increase machine stability and have better performances while cutting, the machine basement is electrowelded with big thickness sections to avoid vibration, binding and sawframe slowdown and eliminate noises.
Bow movement and blade
Blade and bow movement and feeding are managed by electric vectorial motors with control display able to e detech and report immediately any error, stop or anomalies.
Wide working area
The machine has a wide working area where 7 motorized (hydraulically) rolls provide for a high loading capacity on every material size with elevate material positioning and accuracy. The piece is bock by an horizontal hydraulic vice.
Blade guides
XS 900 blade guides has hard metal pads and include cemented, hardened, rectified laterial rolls with easy regulation. The blade guide is kept next automatically close to the cutting area.
Blade tension
Blade tensioning is provided by hydraulic cylinder, managed by the machine software. When the machine is pause paused and doesn't need to be used, the system automatically releases the blade, reducing the tension to extend blade life. In case of blade breakage, the XS automatically stops.
Chip conveyor
XS is equipped with a chip conveyor that ease the expulsion of remainings and resistuals so that the working area is always clean and nothing could affect the cutting process.
Minimal lubrification (Optional)
It's possibile to require for all IMET machine the minimal lubrifcation system in kit with 2 nozzle and 3 l tank capacity. The system allows to avoid the dispersion of coolant liquid, typical when the emulsifiable is used; blde life in not anyway affected .
Blade deviation control (Optional)
The blade deviation control allows to always have the perfect allignment and blade position and it also has automatic detection and stops of the cutting process in case of breakage.
Laser day (Optional)
To ease the material positioning and help the user to view the cutting line, the machine can add a laser ray to point the exaxt cutting point.
Loading/unloading roller table (Optional)
Loading and loading roller table with free rolls and compatible with measurement system. Single module 2m long
Roller table preset for motorization (Optional)
Motorized roller table preset for motorization with chain transmissione and pinions.
Motorization system (Optional)
Motorization system for motorized roller table, recommended every 6m length.
Steel sawframe
The machine has a big size, strong, rigid and imposing electrowelded sawframe structure, sliding on linear guides which movement is provided by recystculating ballscrws. Big size structure increase machine stability, efficiency and performances while cutting even the biggest pieces.
Rigid structure
To further increase machine stability and have better performances while cutting, the machine basement is electrowelded with big thickness sections to avoid vibration, binding and sawframe slowdown and eliminate noises.
Bow movement and blade
Blade and bow movement and feeding are managed by electric vectorial motors with control display able to e detech and report immediately any error, stop or anomalies.
Wide working area
The machine has a wide working area where 7 motorized (hydraulically) rolls provide for a high loading capacity on every material size with elevate material positioning and accuracy. The piece is bock by an horizontal hydraulic vice.
Blade guides
XS 900 blade guides has hard metal pads and include cemented, hardened, rectified laterial rolls with easy regulation. The blade guide is kept next automatically close to the cutting area.
Blade tension
Blade tensioning is provided by hydraulic cylinder, managed by the machine software. When the machine is pause paused and doesn't need to be used, the system automatically releases the blade, reducing the tension to extend blade life. In case of blade breakage, the XS automatically stops.
Chip conveyor
XS is equipped with a chip conveyor that ease the expulsion of remainings and resistuals so that the working area is always clean and nothing could affect the cutting process.
Minimal lubrification (Optional)
It's possibile to require for all IMET machine the minimal lubrifcation system in kit with 2 nozzle and 3 l tank capacity. The system allows to avoid the dispersion of coolant liquid, typical when the emulsifiable is used; blde life in not anyway affected .
Blade deviation control (Optional)
The blade deviation control allows to always have the perfect allignment and blade position and it also has automatic detection and stops of the cutting process in case of breakage.
Laser day (Optional)
To ease the material positioning and help the user to view the cutting line, the machine can add a laser ray to point the exaxt cutting point.
Loading/unloading roller table (Optional)
Loading and loading roller table with free rolls and compatible with measurement system. Single module 2m long
Roller table preset for motorization (Optional)
Motorized roller table preset for motorization with chain transmissione and pinions.
Motorization system (Optional)
Motorization system for motorized roller table, recommended every 6m length.
