H800 is the semiautomatic double column bandsaw for straight cut (90°) that provides high working performances with reliable cutting quality and an optimized cutting process thanks to the 5° canted blade, easing the material penetration even on the biggest sizes. The machine is suitable for tubes, pipes, full materials and carpentry works.
Other infos DownloadCutting capacity at 90° |
Round: 680mm Square: 640mm Rectangular: 820x610mm |
Cutting capacity at 90° full material |
350mm |
Bundle cutting capacity |
800x560mm MAX 110x20mm MIN |
Blade motor |
5.5KW |
Blade speed |
from 15 to 100 m/min |
Blade size |
7260x41x1.3mm |
Blade tension |
2000kg/cm2 |
Band inclination |
5° |
weight |
3100kg |
Size |
1550x3600x2700mm |
Working table height |
800mm |
Hydraulic unit motor |
0.75KW |
Hydraulic unit tank capacity |
20l |
H series bandsaws are equipped with a wide working plate that can fully support the material, allowing to have a stable and reliable cut.
H 800 saws is electrowelded in steel with rigid tubolar section and big thickness to help reduce any vibration while cutting even the largest diameters. The massive structure also avoids binding or slowdowns of the sawing rates.
Semiautomatic bandsaws are equipped with mobile panel control and 10" touch screen display with simple and intuitive interface that gives to the user full control and possibilty to set and modify all the machine's settings and functionalities.
The cutting process is optimized by the 5° canted blade that allows to ease the material penetration, reducing the band strain, helping save blade life and improving cutting performance even on full materials and big diameters and sections.
IMET bandsaws have a high blade tension (2000kg/cm2 on H 800 model) to increase the machine performance on every kind of material and section.
H 800 and H 1200 recognise the start cut point thanks to a magnetic strip with encoder for material reading: the operator must set the material size on the panel control, the machine starts the automatic fast lowering of the sawframe up to the set value. This process allows to have a faster and easier approach to the material, helping saving time.
Operator can choose among different option for the end cut: sawframe rising while the blade is not working, with blade in function and end-cycle without moving the bow.
Registrable blade guides in metal pads and bearings. The mobile blade guide is automatically being kept next the cutting area.
The machine mounts a motorized cleaning brush with nylon teeth, allowing to remove residuals and remainings in the cutting area and on the blade.
H 800 mounts an hydraulic horizontal vice with full stroke so that the material is perfectly locked and ready to be cut.
Hydraulic bundle cutting device (Max 800x560mm
Min 110x20mm
It is possible to require, for all Imet machines, the minimal lubrication system, it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected. Minimal lubrification system for H 800 has a 3 liters capacity.
Blade deviation control with process stop in case of breakage.
Laser ray to optimize the working process of the operator that helps to view the set cutting line.
Loading and unloading roller table with free rolls. Single module 2m with 2 containment vertical rolls on one side.
Roller table preset for motorization with chain transmission and pignons. The element price is to be intended for a single metre.
Motorization system for motorized roller table. Recommended every 6m in length. Max speed 10m/min
CNC motorized measurement length stop with fast approaching and automatic slowdown of the piece. To be ordered toghter with RTR motorized roller table. -RR6S measurement length 6m -RR9S measurement length 9m -RR12S measurement length 12m
Pair of vertical containment rolls made in steel. Max 2 pairs every 1.5m
H series bandsaws are equipped with a wide working plate that can fully support the material, allowing to have a stable and reliable cut.
H 800 saws is electrowelded in steel with rigid tubolar section and big thickness to help reduce any vibration while cutting even the largest diameters. The massive structure also avoids binding or slowdowns of the sawing rates.
Semiautomatic bandsaws are equipped with mobile panel control and 10" touch screen display with simple and intuitive interface that gives to the user full control and possibilty to set and modify all the machine's settings and functionalities.
The cutting process is optimized by the 5° canted blade that allows to ease the material penetration, reducing the band strain, helping save blade life and improving cutting performance even on full materials and big diameters and sections.
IMET bandsaws have a high blade tension (2000kg/cm2 on H 800 model) to increase the machine performance on every kind of material and section.
H 800 and H 1200 recognise the start cut point thanks to a magnetic strip with encoder for material reading: the operator must set the material size on the panel control, the machine starts the automatic fast lowering of the sawframe up to the set value. This process allows to have a faster and easier approach to the material, helping saving time.
Operator can choose among different option for the end cut: sawframe rising while the blade is not working, with blade in function and end-cycle without moving the bow.
Registrable blade guides in metal pads and bearings. The mobile blade guide is automatically being kept next the cutting area.
The machine mounts a motorized cleaning brush with nylon teeth, allowing to remove residuals and remainings in the cutting area and on the blade.
H 800 mounts an hydraulic horizontal vice with full stroke so that the material is perfectly locked and ready to be cut.
Hydraulic bundle cutting device (Max 800x560mm
Min 110x20mm
It is possible to require, for all Imet machines, the minimal lubrication system, it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected. Minimal lubrification system for H 800 has a 3 liters capacity.
Blade deviation control with process stop in case of breakage.
Laser ray to optimize the working process of the operator that helps to view the set cutting line.
Loading and unloading roller table with free rolls. Single module 2m with 2 containment vertical rolls on one side.
Roller table preset for motorization with chain transmission and pignons. The element price is to be intended for a single metre.
Motorization system for motorized roller table. Recommended every 6m in length. Max speed 10m/min
CNC motorized measurement length stop with fast approaching and automatic slowdown of the piece. To be ordered toghter with RTR motorized roller table. -RR6S measurement length 6m -RR9S measurement length 9m -RR12S measurement length 12m
Pair of vertical containment rolls made in steel. Max 2 pairs every 1.5m