KS 620

Vice and material locking

The vice slides transversally on the work surface, linear guides, locking and rapid approach, complete with standard pressure reducer. All the saws of KS series (450, 502, 620 and 652) allow to fix the material clamping vice only once and then to rotate the arc for cutting both right and left (up to 60 °).

Large working table

Easy to use thanks to the rotating work surface integral with the arc and the blade passage to optimize the material support system during processing in all angles.

Cutting precision

The cutting precision is ensured by the graduated scale (on the work surface) which constitutes a visual reference for the operator in case of angle cutting. There're also automatic stops at 45°left, 0 ° and 45 ° right. To increase cutting precision, IMET band saws are equipped of a system for detecting degrees of cut away from the center.

Steelframe and blade inclination

In electro-welded steel, the blade has an inclination of 6 ° to improve the penetration in the material and optimize the execution of the cut. The rotation of the arc is done by bearing preloaded. The blade of KS 620 has a tensionning of 2000kg / cm2 and is equipped with a control microswitch for immediate stop in case of blade breaking or power failure.

Inclinated blade

KS 620 and all the saws of the KS range finish the cut with the blade inclined 6 °, facilitating the penetration of the blade into the material and allowing to always cut a section of material even in presence of a solid.

Material detection device

To facilitate the approach of the blade to the material KS450 mounts a device for detection automatic cutting start and end point. The machine offers the opportunity to remove the device if you want to increase the cutting capacity at 0 ° and 45 ° (right and left).

Blade cleaning

Motorized nylon cleaning brush for blade, driven by motor pulley to always keep in perfect condition the cutting blade.

Control panel

KS 620 is equipped with a mobile control console with control LED for tensioning the blade, opening of the blade guard, motor thermal block and electrical tension. Through the coontrol the operator can choose between 3 different ways of cutting end: ascent of the bow with stopped blade, ascent of the bow with blade in movement and end of cycle without bow ascent.

Laser (Optional)

Minimal lubrication system (Optional)

The lubrication system cancels the dispersion of the coolant without damaging or affecting the life of the blade. The system is equipped with a 1.3l tank and nozzle.

Synchronization for arc and roller conveyors movement (Optional)

The synchronization system between the RTP line (unloading roller conveyors) and movement of the cutting arc.

Angle display (Optional)

It is possible to view the cutting angle and optimize the work process thanks to the visualization via LCD display.

Hydraulic device for bundle cutting (Optional)

Hydraulic device for bundle cutting Max: 500x300mm
Min: 160x40mm

Loading/unloading roller table (Optional)

Roller conveyor suitable for the unloading and loading side. Length 1.5m, 1 pedestal, max loading 1500kg.

Unloading roller table (Optional)

Unloading roller table with digital reading and manual movement. Available : -RTL3KS600 Measuring lenght of 3m, 3 pedestals, max loading 3000kg; -RTL6KS600 Measuring lenght of 6m, 5 piedestals, max loading 6000kg.

Unloading roller table (Optional)

Unloading roller table with length stop and selection of the lengths by means of a keyboard Available: -RTP3KS600 Measuring lenght of 3m, 3 pedestals, max loading 3000kg; -RTP6KS600 Measuring lenght of 6m, 5 piedestals, max loading 6000kg.

Motorized loading roller table (Optional)

Loading motorised roller tables, with chain transmission and motor reducer managed by inverter, with mobile keyboard. Available : -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.

Motorized unloading roller table (Optional)

Unloading motorized roller table, with chain transmission and motor reducer managed by inverter, available only together with loading roller table. Available: -3m, loading 3000kg; -6m, loading 6000kg; -9m, loading 9000kg; -12m, loading 12000kg.

Additional foot for machine

Additional foot in kit, to be used to fix the machine to ground once positioned

Additional foot for roller tables

Additional foot in kit, to be used to fix the roller tables to ground once positioned

Digital reading length stop (Optional)

Digital reading length stop with manual positioning with automatic slowdown sensors, available only together with unloading motorized roller table
Measuring lenght 3m; Measuring lenght 6m; Measuring lenght 9m; Measuring lenght 12m

Motorized lenght stop (Optional)

Numerical control motorized measurement RR with fast approching for automatic slowdown of the piece (to be ordered coupled with automatic conveyors) -RR6S 6m measuring lenght -RR9S 9m measuring lenght -RR12S 12m measuring lenght

Vertical rollers (Optional)

Pair of containment vertical rollers, made in steel, max 2 pairs for each element 1,5 mt long.

Single vertical roller (Optional)

Single vertical roller, height of 250 mm. to prevent falls, max 2 each 1,5 mt.