CUBO 300 E FLAT is the electronic automatic bandsaw, is an innovative working tool intended to cut medium size tube, profiles and bars. The machine allows to cut one cutting length at a time by setting the measure and the position with the manual handler with digital reading. Machine has manual rotation of the bow and automatic material feeder.
video Other infos DownloadCutting capacity at 0° |
Round: 255mm Square: 230mm Rectangular 300x180mm |
Cutting capacity at 45° |
Round: 210mm Square: 190mm Rectangular 200x160mm |
Cutting capacity at6 60° |
Round: 135mm Square: 110mm Rectangular 130x100mm |
Cutting capèacity with bundle cutting |
Max. 250x120mm Min. 120x20mm |
Blade motor |
1.5/1.8KW |
Blade motor with ESC |
1.5KW |
Blade speed |
18-100m/min |
Blade speed with ESC |
35-70m/min |
Blade size |
2765x27x0.9mm |
Altezza piano di lavoro |
870mm |
Feeder length |
515mm |
Feeder motor power |
0.75kw |
Scrap end |
230mm |
Min cutting length in automatic cycle |
15mm |
Hydraulic unit tank |
20l |
Coolant tank capacity |
100l |
Working table height |
870mm |
Weight |
850kg |
Size |
1940x1880x1830mm |
CUBO Series introduces a cluster of innovation about design and new functionalities: CUBO range aims to optimize our customers user experience safeguarding the security of the machine operator during the cutting process, making CUBO the ideal working tool for every professional environment and metal carpentry.
CUBO Series bandsaws has an automatic material detection system thanks to a mechanical device (position sensor) that allows the sawframe to lower quickly toward the material, detecting the automatically the start-cut point and micro-switch to control the end cut point.
The machine is equipped with electronic control wich manual selection of the cutting length with digital reading: after setting the required length and the number of cuts, a trim cuti is performed, then the bar is cut till the end
Programming of all operation by means of the keayboard: through the machine display is also possible to manage blade life and speed, pieces counter, cycle time, motor absorption and working anomalies.Through the panel control is also possible to set the number of cuts.
CUBO 300 E FLAT is equipped with a feeder system with floating adjustment to ease the loading of material non perfectly straight and 300 mm opening; the maximum single stoke is 515 mm while the minimum is 4 mm
Cutting performances are guaranteed by the cast-iron sawframe with tubolar section and high blade tension (1700 kg/cm2) that reduce the strain on the blade, helping to optimze cutting times even on bigger and wider sections.
A carter protect che blade, allowing to have easy access for maintentance when needed; a system with blade guides with hard pads, additional lateral bearings provides for the perfect allignment of the blade. A motorized metal brush keeps the blade clean and provide to remove any residual while working.
Electronic inverter for variable blade speed 19-100m/min.
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
Two pressure reducer for hydraulic vices.
Loading/unloading roller table, first element, 2 m long, maximum capacity 700kg
Loading/unloading roller table, 2m long, following element, maximum capacity 600kg
Pair of vertical rollers 300 mm made in steel, max 2 pairs for each element 2m long. To use without rollers covers.
CUBO Series introduces a cluster of innovation about design and new functionalities: CUBO range aims to optimize our customers user experience safeguarding the security of the machine operator during the cutting process, making CUBO the ideal working tool for every professional environment and metal carpentry.
CUBO Series bandsaws has an automatic material detection system thanks to a mechanical device (position sensor) that allows the sawframe to lower quickly toward the material, detecting the automatically the start-cut point and micro-switch to control the end cut point.
The machine is equipped with electronic control wich manual selection of the cutting length with digital reading: after setting the required length and the number of cuts, a trim cuti is performed, then the bar is cut till the end
Programming of all operation by means of the keayboard: through the machine display is also possible to manage blade life and speed, pieces counter, cycle time, motor absorption and working anomalies.Through the panel control is also possible to set the number of cuts.
CUBO 300 E FLAT is equipped with a feeder system with floating adjustment to ease the loading of material non perfectly straight and 300 mm opening; the maximum single stoke is 515 mm while the minimum is 4 mm
Cutting performances are guaranteed by the cast-iron sawframe with tubolar section and high blade tension (1700 kg/cm2) that reduce the strain on the blade, helping to optimze cutting times even on bigger and wider sections.
A carter protect che blade, allowing to have easy access for maintentance when needed; a system with blade guides with hard pads, additional lateral bearings provides for the perfect allignment of the blade. A motorized metal brush keeps the blade clean and provide to remove any residual while working.
Electronic inverter for variable blade speed 19-100m/min.
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
Two pressure reducer for hydraulic vices.
Loading/unloading roller table, first element, 2 m long, maximum capacity 700kg
Loading/unloading roller table, 2m long, following element, maximum capacity 600kg
Pair of vertical rollers 300 mm made in steel, max 2 pairs for each element 2m long. To use without rollers covers.