English
Español
Français
ItalianoCUBO 350 NC BOX
Numerical control automatic sawing machine
CUBO 350 NC BOX is an automatic sawing machine belonging to the innovative CUBO SERIES. It is a reliable, safe and easy to use work tool thanks to the 7 "touch screen display with the possibility of remote cutting management via INDUSTRY 4.0 READY. The rotation of the bow is manual with integrated feeder carriage.
video Other infos DownloadTechnical information
| Cutting capacity at 0 ° |
Round: 305mm Square: 250mm Rectangle: 350x200mm0mm |
| Cutting capacity at 45 ° left |
Round: 255mm Square: 230mm Rectangle: 230x200mm0mm |
| Cutting capacity at 60 ° right |
Round: 175mm Square: 155mm Rectangle: 170x100mm0mm |
| Bundle cutting capacity |
Max: 300x160mm; Min. 90x10mm |
| Cutting capacity at 0 ° full (C45)) |
200mm |
| Blade size |
3370x27x0.9mm |
| Blade motor |
1.8KW |
| Blade speed |
15-100 m/min |
| Stroke of the feeder carriage |
500mm |
| Motor of the feeder carriage |
0.75KW |
| Minimal scrap end |
80mm |
| Hydraulic power unit tank capacity |
20l |
| Coolant tank capacityfrigerante |
100l |
| Minimum cutting length |
20mm |
| Dimensions |
2200x2385x1610mm 1000kg |
CUBO SERIES
CUBO is the line of automatic saws developed to optimize the user experience of the user thanks to the introduction of various stylistic and functional innovations. Ease of use and safety d'uso e la sicurezza for the operator during the cutting process make it the ideal work tool for any work environment.
Security and accessibility
CUBO 350 NC BOX has an integrated protection system on all sides of the machine to ensure maximum operator safety during cutting. The protection system does not prevent complete accessibility to all internal parts (movable and not) of the machine in case of maintenance.
Touch screen: innovative and intuitive
Through the 7-inch touch screen display (with simple and intuitive graphics to optimize the operator's user experience) it is possible to set and control all the machine parameters; the interface allows you to set cutting programs with different quantities and lengths on the same bar and to view any errors during the cutting process.
Numerical control and cutting management
It allows to store up to 99 cutting programs, 40 cutting lines and 9999 cuts for each program. The machine automatically calculates the thickness of the blade, the total number of pieces to be cut, the settings of the cutting lengths, managing the cutting cycle automatically.tico.
Mechanical feeler device
CUBO 350 NC BOX is equipped with a mechanical device for the automatic detection of the material and the cutting start point, optimizing the cutting process. The management of the end of the cut is instead guaranteed by an adjustable control microswitch.
Advance carriage
The feed carriage has a maximum stroke of 515mm. The feeder movements is on chromed bars with high positioning accuracy due to the incremental feeding on recirculating ball screw by self-braking electric motor with inverter.
Speed variator
All CUBO SERIES automatic saws (in the BOX and FLAT versions) are equipped as standard with an inverter blade speed variator.
Cleaning of the blade
To keep the blade clean and prevent material chips from compromising the quality of the cut, the IMET semi-automatic and automatic saws are fitted as standard with a motorized blade cleaning brush with nylon teeth.
Industry 4.0 ready - SAWFACTORY (Optional)
All CUBO Series automatic saws can be connected to the company network via modem: the dedicated software SAWFACTORY is also available for remote service, assistance, programming and remote management of the cutting process. The software allows to transfer data and programs from the PC (where the program is created) to the machine via USB. Discover SAWFACTORY: https://bit.ly/2RuxHuX
Automatic sawframe rotation (Optional)
CUBO 350 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle. Link: https://youtu.be/wZAjSwt6x3Y
Hydraulic device for bundle cutting(Optional)
The CUBO automatic band saws in the BOX version can be used with the bundle cutting device. The bundle cut can only be used for 0° cutting. Single piece capacity with mounted device: 350x160mm max, 55x10mm min. Cutting capacity for bundle is: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the carriage vice and disconnecting the hydraulic tubes using the quick couplings systems. Not compatible with laser ray.
Minimal lubrication system (Optional)
It is possible to request for any machine the minimum lubrication which eliminates the dispersion of coolant typical in the use of emulsifiable oil, the duration of the blade is not affected in any way. Tank capacity : 1.3 liters.
Motorized chip conveyor (Optional)
It's available for all the CUBO SERIES bandsaw an optional motorized screw chip conveyor placed laterally (on the unload side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing chips while cutting.
Pressure reducers (Optional)
Two pressure reducers in kit for hydraulic vices are available for CUBO 350 NC BOX.
Laser ray (Optional)
To optimize the workflow, a laser ray is available to simulate the cutting line on the material during the process. Not compatible wih bundle cutting device.
Connection for loading table (Optional)
Connection element for loading table on the loading side.
Pair of vertical rollers (Optional)
Pair of vertical steel containment rollers. Maximum 2 pairs for each 2m element; to be used without rollers cover.
CUBO SERIES
CUBO is the line of automatic saws developed to optimize the user experience of the user thanks to the introduction of various stylistic and functional innovations. Ease of use and safety d'uso e la sicurezza for the operator during the cutting process make it the ideal work tool for any work environment.
Security and accessibility
CUBO 350 NC BOX has an integrated protection system on all sides of the machine to ensure maximum operator safety during cutting. The protection system does not prevent complete accessibility to all internal parts (movable and not) of the machine in case of maintenance.
Touch screen: innovative and intuitive
Through the 7-inch touch screen display (with simple and intuitive graphics to optimize the operator's user experience) it is possible to set and control all the machine parameters; the interface allows you to set cutting programs with different quantities and lengths on the same bar and to view any errors during the cutting process.
Numerical control and cutting management
It allows to store up to 99 cutting programs, 40 cutting lines and 9999 cuts for each program. The machine automatically calculates the thickness of the blade, the total number of pieces to be cut, the settings of the cutting lengths, managing the cutting cycle automatically.tico.
Mechanical feeler device
CUBO 350 NC BOX is equipped with a mechanical device for the automatic detection of the material and the cutting start point, optimizing the cutting process. The management of the end of the cut is instead guaranteed by an adjustable control microswitch.
Advance carriage
The feed carriage has a maximum stroke of 515mm. The feeder movements is on chromed bars with high positioning accuracy due to the incremental feeding on recirculating ball screw by self-braking electric motor with inverter.
Speed variator
All CUBO SERIES automatic saws (in the BOX and FLAT versions) are equipped as standard with an inverter blade speed variator.
Cleaning of the blade
To keep the blade clean and prevent material chips from compromising the quality of the cut, the IMET semi-automatic and automatic saws are fitted as standard with a motorized blade cleaning brush with nylon teeth.
Industry 4.0 ready - SAWFACTORY (Optional)
All CUBO Series automatic saws can be connected to the company network via modem: the dedicated software SAWFACTORY is also available for remote service, assistance, programming and remote management of the cutting process. The software allows to transfer data and programs from the PC (where the program is created) to the machine via USB. Discover SAWFACTORY: https://bit.ly/2RuxHuX
Automatic sawframe rotation (Optional)
CUBO 350 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle. Link: https://youtu.be/wZAjSwt6x3Y
Hydraulic device for bundle cutting(Optional)
The CUBO automatic band saws in the BOX version can be used with the bundle cutting device. The bundle cut can only be used for 0° cutting. Single piece capacity with mounted device: 350x160mm max, 55x10mm min. Cutting capacity for bundle is: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the carriage vice and disconnecting the hydraulic tubes using the quick couplings systems. Not compatible with laser ray.
Minimal lubrication system (Optional)
It is possible to request for any machine the minimum lubrication which eliminates the dispersion of coolant typical in the use of emulsifiable oil, the duration of the blade is not affected in any way. Tank capacity : 1.3 liters.
Motorized chip conveyor (Optional)
It's available for all the CUBO SERIES bandsaw an optional motorized screw chip conveyor placed laterally (on the unload side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing chips while cutting.
Pressure reducers (Optional)
Two pressure reducers in kit for hydraulic vices are available for CUBO 350 NC BOX.
Laser ray (Optional)
To optimize the workflow, a laser ray is available to simulate the cutting line on the material during the process. Not compatible wih bundle cutting device.
Connection for loading table (Optional)
Connection element for loading table on the loading side.
Pair of vertical rollers (Optional)
Pair of vertical steel containment rollers. Maximum 2 pairs for each 2m element; to be used without rollers cover.
Products RELATED
