CUBO 400 NC FLAT is an automatic bandsaw with CNC suitable to be a professional working tool for batch production for tubes, bars, profiles and solids. The machine bow rotation is manual while the automatic feeder is integrated. Thanks to INDUSTRY 4.0 READY optional, the user can control its machine remotely (or with the 7" integrated touch screen display)
video Other infos DownloadCutting capacity at 0° |
Round: 310mm Square: 280mm Rectangular: 400x250mm |
Cutting capacity ata 45° sinistra |
Round: 280mm Square: 270mm Rectangular: 300x200mm |
Cutting capacity ata 60° sinistra |
Round: 210mm Square: 200mm Rectangular: 200x200mm |
Cutting capacity with bundle cutting |
Max: 300x160mm Min: 85x10mm |
Cutting capacity at 0° with solids (C45) |
250mm |
Blade size |
4020x34x1.1mm |
Blade motor |
2.2KW |
Blade speed |
18-100m/min |
Minimum cutting length (automatic) |
20mm |
Feeder single stroke |
515mm |
Feeder motor power |
0,75KW |
Minimum scrap end |
80mm |
Working area height |
890mm |
Weight |
990kg |
Size |
2405x2305x2170mm |
Automatic IMET bandsaws have touch screen display (7" in this version) that allows to manage, set and view all functioning settings with just few clicks. The interface is intuitive, simple and easy-to-use, so that the user can easilty set cutting lines and programs, have a self-diagnosis to detech errors. The CNC system allows to set up to 99 programs, 10 lengths for each bars while the cutting length range goes from 4mm to 9999mm with automatic stroke repetition.
Machine has an integrated feeder with 515mm single stroke. The feeder is on floating plate that allows to load also not-rectilinear bars. Full stroke on tempered guides for highest positioning precision.
The incremental screws provides for the highest positioning precision. The movement is provided by electric motor with inverter, econcoder and recyrculating ballscrew.
CUBO 400 NC FLAT is equipped with a mechanical detech device for material detection while starting the cut to optimize the cutting process: the device ease the sawframe fast approach to the material, regulating also the end cut, blade penetrationa and blade rising once the process ends.
IMET bandsaws have strong and rigid steel sawframe with tubolar section to give maximum resistance while cutting. Blade allignment guaranteed by mobile hard pads blade guides. This strong structure allows to reduce vibration and bindings while cutting, increasing cutting performances.
Automatic bandsaws produced by Imet are standardly equipped with electronic inverter for speed variation speed that increase speed range to 18-100 m/min. BS 400/60 AFI-NC blade motor has 2.2kw power with motor reducer.
CUBO 400 NC FLAT uses a blade 34mm to optimize cutting performances and times: with this blade and its motor reducer the machines has a perfect material penetration even on bigger profiles (and solid materials up to 250mm with C45 steels)
All Imet semiautomatic and automatic machine mount as standard a motorized metal brush with nylon teeth.
IMET automatic machines can be connected to the company network and be used remotely thanks SAWFACTORY and modem. SAWFACTORY is a dedicated software which allows to manage the cutting process from the office desk by setting cutting programs and monitoring the workflow thanks to the dedicated web app. The software also allows to also receive assistance by our technicians remotely. Discover SAWFACTORY: https://bit.ly/2RuxHuX
The CUBO automatic band saws (FLAT/BOX versione) can be used with bundle cutting device. The bundle cut can only be used for 0° cutting. Single piece capacity with mounted device: 350x160mm max, 55x10mm min. Cutting capacity for bundle is: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the carriage vice and disconnecting the hydraulic tubes using the quick couplings systems. The device cannot be mounted on the same machine with laser ray.
Minimal lubrification system to avoid any coolant dispersion, keeping working area perfectly clean so that the machine can always work in the most efficient way; it works thanks to automatic switch and it has 2 nozzle and 1.3 l tank capacity.
It's available for all the CUBO SERIES automatic bandsaw an optional motorized chip conveyor placed laterally (on unloading side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing remainings and chips while cutting.
CUBO 400 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle. Link: https://youtu.be/wZAjSwt6x3Y
To ease the working process, it's possibile to require di special laser ray that points the cutting line on the material before starting to operate. It can't be put on the same machine with hydraulic bundle device.
It's possible to view the set angle throught a digital display on panel control.
Connection element for loading side to connect the RTS roller table with the machine.
Loading and unloading roller table with free rolls. First element.
Following element for roller table with free rolls for loading and unloading side.
Pair of containment vertical roller in steel. Max 2 pairs every 1.5m
Automatic IMET bandsaws have touch screen display (7" in this version) that allows to manage, set and view all functioning settings with just few clicks. The interface is intuitive, simple and easy-to-use, so that the user can easilty set cutting lines and programs, have a self-diagnosis to detech errors. The CNC system allows to set up to 99 programs, 10 lengths for each bars while the cutting length range goes from 4mm to 9999mm with automatic stroke repetition.
Machine has an integrated feeder with 515mm single stroke. The feeder is on floating plate that allows to load also not-rectilinear bars. Full stroke on tempered guides for highest positioning precision.
The incremental screws provides for the highest positioning precision. The movement is provided by electric motor with inverter, econcoder and recyrculating ballscrew.
CUBO 400 NC FLAT is equipped with a mechanical detech device for material detection while starting the cut to optimize the cutting process: the device ease the sawframe fast approach to the material, regulating also the end cut, blade penetrationa and blade rising once the process ends.
IMET bandsaws have strong and rigid steel sawframe with tubolar section to give maximum resistance while cutting. Blade allignment guaranteed by mobile hard pads blade guides. This strong structure allows to reduce vibration and bindings while cutting, increasing cutting performances.
Automatic bandsaws produced by Imet are standardly equipped with electronic inverter for speed variation speed that increase speed range to 18-100 m/min. BS 400/60 AFI-NC blade motor has 2.2kw power with motor reducer.
CUBO 400 NC FLAT uses a blade 34mm to optimize cutting performances and times: with this blade and its motor reducer the machines has a perfect material penetration even on bigger profiles (and solid materials up to 250mm with C45 steels)
All Imet semiautomatic and automatic machine mount as standard a motorized metal brush with nylon teeth.
IMET automatic machines can be connected to the company network and be used remotely thanks SAWFACTORY and modem. SAWFACTORY is a dedicated software which allows to manage the cutting process from the office desk by setting cutting programs and monitoring the workflow thanks to the dedicated web app. The software also allows to also receive assistance by our technicians remotely. Discover SAWFACTORY: https://bit.ly/2RuxHuX
The CUBO automatic band saws (FLAT/BOX versione) can be used with bundle cutting device. The bundle cut can only be used for 0° cutting. Single piece capacity with mounted device: 350x160mm max, 55x10mm min. Cutting capacity for bundle is: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the carriage vice and disconnecting the hydraulic tubes using the quick couplings systems. The device cannot be mounted on the same machine with laser ray.
Minimal lubrification system to avoid any coolant dispersion, keeping working area perfectly clean so that the machine can always work in the most efficient way; it works thanks to automatic switch and it has 2 nozzle and 1.3 l tank capacity.
It's available for all the CUBO SERIES automatic bandsaw an optional motorized chip conveyor placed laterally (on unloading side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing remainings and chips while cutting.
CUBO 400 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle. Link: https://youtu.be/wZAjSwt6x3Y
To ease the working process, it's possibile to require di special laser ray that points the cutting line on the material before starting to operate. It can't be put on the same machine with hydraulic bundle device.
It's possible to view the set angle throught a digital display on panel control.
Connection element for loading side to connect the RTS roller table with the machine.
Loading and unloading roller table with free rolls. First element.
Following element for roller table with free rolls for loading and unloading side.
Pair of containment vertical roller in steel. Max 2 pairs every 1.5m